Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
If the channel is in memory, it will be labeled “ADD,” and the number in the corner will be green. If the channel is not in memory, it will be labeled “ERASE,” and the number in the corner will be magenta. 4 Use the CVOLB buttons to change the ADD or ERASE setting. 5 Wait 7 seconds, or press MENU twice to exit. 2 3 41 12 Chapter 3 : Operating Your TV Changing the TV’s Input Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV (such as a VCR) using the Audio/Video Inputs, you will want to be able to view the signal from that component. To do this, you will need to switch from the “TV” input to the “Video” input, as follows; 1 With the TV turned on, Press MENU 2 You will see the Main Menu, Use the VCHW buttons to select SETUP and press CVOLB. 3 Use the VCHW buttons to select INPUT. 4 Press CVOLB to change from TV to VIDEO. Press CVOLB again to switch back to TV. 5 Wait 7 seconds to return to normal viewing, or press MENU twice. 2 3 41 Changing the TV’s Input with the remote control 1 You can also change the TV/VIDEO setting with the remote control. Press TV/VIDEO button on the remote control to change from TV to VIDEO. Press TV/VIDEO button again to switch back to TV. 1 Displaying the Current Channel 1 1 To quickly see the current channel, press RECALL. The current channel will be displayed briefly. Chapter 3 : Operating Your TV 13 Chapter 3 : Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. 2 Use the VCHWbuttons to select PICTURE. 3 Press the CVOLB buttons. The picture menu will appear. 4 The AUTO feature will be selected. Use the CVOLB button to turn AUTO to OFF. This will allow you to manually adjust the video settings. 5 Use the VCHWbuttons to select the video setting you wish to adjust. Descriptions of the video settings are on the next page. 6 Use the CVOLB buttons to adjust the video setting to the level you prefer. 7 Use the VCHWbuttons to select another video setting to adjust. 8 When you are finished, press the MENU button twice to return to normal viewing. 14 5 6 7 8 1 2 3 4 Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page. 2 Press the CVOLB buttons to set the AUTO setting to ON. This will return all video settings to their default levels, as set at the factory. 3 You can also return to the factory settings during normal TV viewing by pressing the AUTO.PICT button on the remote control. The TV will remember the “custom” settings you had previously chosen. When you set AUTO to OFF again, your previous custom settings will be restored. 31 2 Descriptions of video settings The contrast setting controls the relation between the light and black areas of the screen. If the light areas are too bright and are losing details, adjust the contrast towards the “-” position; if the picture is gray and lacks contrast, adjust the contrast towards the “+” position. The brightness settings controls the overall amount of light in the picture. If the picture is too bright, adjust the brightness setting towards the “-” position; if the picture is too dark, adjust the brightness towards the “+” position. Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple vertical lines at the edges of an object, adjust sharpness towards the “-” position; if the vertical edges of on-screen objects are fuzzy, adjust sharpness towards the “+” position. The color setting controls the intensity of color. If the color is over-saturated, adjust the color towards the “-” position; if the color is washed out, adjust the color towards the “+” position. The tint setting controls the relationship of red and green in a picture. Tint is especially noticeable in flesh tones. If flesh tones seem too red or purple, adjust the color towards “G”; if the flesh tones are too green, adjust the color towards “R”. Chapter 3 : Operating Your TV 15 CHAPTER 4 Setting the Sound Your TV set is capable of decoding a STEREO signal. Changing The Sound Mode 1 With TV turned on, press the MENU button. 2 Use the VCHW buttons to select sound. 3 Press the CVOLB buttons. The SOUND menu will be displayed. 4 Use the VCHW buttons to change the STEREO or MONO setting. 5 Wait 7 seconds, or press MENU twice to exit. 2 3 41 02 16 Chapter 4 : Setting the Sound CHAPTER 5 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1 With the TV turned on, press the MENU button. 2 Use the VCHW buttons to select TIMER. 3 Press the CVOLB button...
Эта инструкция также подходит к моделям:Телевизоры - DTQ 25S2FCV (885.22 kb)