Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
2 Lay the TV on a flat, cushioned surface. 3 Align the screw holes on the stand with the holes on the bottom edge of the TV. 4 Secure the stand with the two screws provided. Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the two screws holding the TV to its base, then remove the base. 3 Secure the wall-mount bracket to the back of your TV/DVD combo using the four screws provided with the bracket. Setting up your remote control 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. To program your existing universal remote control to work with your new Dynex TV, see the table below for common codes. If you have problems programming your remote or need a different remote control code, visit for the latest remote control code information. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station Using HDMI (best) Connecting an antenna Connect a 75 ohm cable (not included) to the RF jack on the back of your TV and to the RF OUT jack on the antenna. Connecting a home theater system Using a digital optical cable: Connecting a Computer Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 115 DirectTV RC23 10463 RCA RCU807 135 One for All URC-6690 0464 Sony RM-VL600 8043 Comcast M1057 0463 Dish Network VIP508, VIP622 720 Motorola DRC800 0463 TIVO Series 3, HD 0091 Universal remote control makers and models Set-top box makers and models Using S-video (fair) Using component (better) Audio Cable Digital cable Remote control sensor Power indicator L/R Audio cable Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007) MENU MENU EXIT Press to move the cursor on the screen or to adjust a selected icon. Press to open the on-screen menu. Press to return to the previous menu. Press to select menu options. Press to confirm a selection or to enter a sub-menu. Press to close the menu. 19” • 22” LCD/DVD COMBO TV I QUICK SETUP GUIDE I DX-19LD150A11/DX-22LD150A11 Connecting power Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Turning on your TV for the first time 1 Plug in your TV and turn it on. The initial Setup Wizard to the Choose your menu language screen. Press or to select English, French, or Spanish, then press ENTER to confirm. 2 The Time screen opens with Mode highlighted. When you are done, press ENTER to move to the next screen. Mode-Select Custom to set date/time manually or Auto to have them set automatically. DST-If your area uses daylight savings Time Zone-Select your time zone If you select Custom, press or to highlight an option, then press or to change the setting. 3 The Choose your Picture Mode screen opens. Press or to highlight Home Mode (recommended) or Retail Mode. If you selected Home Mode. 4 The Choose your TV source ...
Эта инструкция также подходит к моделям:Телевизоры - DX-22LD150A11 (3.98 mb)