Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. CHANNEL SET UP FOR THE FIRST TIME 1 Plug in the TV/VCR power cord Attach the smaller end of the supplied AC cord to the AC 120V connector on the back of the TV/VCR. Then, plug the other end into a standard AC outlet. NOTES: AC 120V • You must disconnect the car battery cord from the TV/VCR before you use AC power. • If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 3 Select “ENGLISH” or “ESPANOL” – SET UP – Select “ENGLISH” or “ESPANOL”=Spanish using the B LANGUAGE [ENGLISH] ESPANOL F.FWD/B or REW/s button. “[ ]” AUTO PRESET indicate the selected language. 4 Begin auto preset – SET UP – Press the PLAY/K or STOP/L but ton to point to “AUTO PRESET”. LANGUAGE [ENGLISH] ESPANOL Then press the F.FWD/B button. B AUTO PRESET The tuner scans and memorizes all active channels in your area. NOTES: • The TV/VCR distinguishes between standard TV channels and cable channels. • If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 13. • The TV/VCR may memorize TV channels as CATV channels if reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better. 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L button. TO SELECT A DESIRED CHANNEL You can select the desired channel by using the CHANNEL K or L button or directly pressing the number buttons on the remote control. Note for using the number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”). • You must proceed single-digit channel numbers with a zero (Example: 02 ... 09). CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”. AUTO CLOCK SETTING You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. - 11-EN 9J27 NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow “Manual Clock Settings”. The TV/VCR cannot control the channels of the cable converter box or satellite box. • If tou use a mobile connection, you cannot set the AUTO CLOCK and D.S.T functions. –M E N U – 1 Select “SETTING CLOCK” TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP Press the MENU button on the USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN remote control. TIME SEARCH Press the PLAY/K or STOP/L but ton to point to “SETTING CLOCK”. Then, press the F.FWD/B button. –SETTING CLOCK – 2 Set “AUTO CLOCK” to [ON] B AUTO CLOCK [ON] Press the F.FWD/B or REW/s AUTO CLOCK CH [AUTO] button repeatedly until [ON] MANUAL CLOCK SET appears. D.S.T. [OFF] 3 Enter the channel number for the PBS station Press the PLAY/K or STOP/L but –SETTING CLOCK – ton to point to “AUTO CLOCK AUTO CLOCK [ON] CH”. CH”. B AUTO CLOCK CH [AUTO] Then press the F.FWD/B or MANUAL CLOCK SET D.S.T. [OFF] REW/s button until the channel number for your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel. 4 Exit the Auto Clock Setting Press the MENU button on the remote control to return t...