Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
17.S-VIDEO input jack- Connect to the SVIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied). NOTE: The S-VIDEO jack on the rear panel is given priority over the VIDEO1 jack. 18.ANT(enna). IN jack- Connect to an antenna, cable system, or satellite system. 19.COMPONENT AUDIO INPUT jacks- Connect to the left/right channel audio output jacks of DVD player when using the Component Video input jacks. 20.COMPONENT VIDEO INPUT jacks- Connect to the Component Video output jacks of DVD player. INSTALLING THE BATTERIES 1) Slide the battery compartment cover back on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit. 3) Replace the cover. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks or COMPONENT VIDEO INPUT jacks, select “VIDEO1” or “VIDEO2” or “COMPONENT” mode by pressing the INPUT SELECT button on the remote control. • To use the VIDEO1 INPUT jacks on the rear of the TV, select “VIDEO1”. • To use the jacks on the front of the TV, select “VIDEO2”. • To use the Component jacks on the rear of the TV, select “COMPONENT”. NOTES: • You may also set the Game mode by pressing the GAME button on the remote control. "GAME" appears on the TV screen. In this case, connect the external source to the AUDIO/VIDEO jacks on the front panel. (See PICTURE ADJUSTMENT.) • When you use the S-VIDEO connection, S-VIDEO jack on the rear panel is given priority over the VIDEO1 jack. PREPARATION FOR USE LANGUAGE SELECTION PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] 3) Press the VOL(ume) button so that "ADD/DELETE" is selected. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. . Press the VOL(ume) or button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. . Press the VOL(ume) or button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. ADD/DELETE AUTO MEMO MTS (Multi-Channel Television Sound) System You can listen to a program in MTS stereo by following the steps below. Type of broadcast Menu Selection MAIN MONO SAP Regular - -- None- -- None- -- None- Stereo broadcast STEREO MONO STEREO SAP MAIN MAIN SAP To show the status, press the DISPLAY button on the remote control. SAP: Second Audio Program, which means your program, can also be received in a second language or sometimes a radio station. [To Select STEREO, MONO or SAP in Stereo broadcast] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) or button to point to "TV SOUND". 3) Press the VOL(ume) or button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].) --- PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MONO] PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [SAP] : Press the VOL(ume) or button. RESUME FUNCTION If the power fails or is disconnected while the TV is powered on, the TV will turn on automatically when the power resumes. If you want to change the language of the on-screen menu, follow the proce dure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) or button to point to "[ENGLISH]". 5) Select "ENGLISH" or "ESPANOL" = Spanish by using the VOL(ume) or button. 6) Press the MENU button to exit the menu. CHANNEL PRESETTING To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV screen. 3) Press the CH(annel) or button to point to "CHANNEL SET". Then, press the VOL(ume) button. 4) Press the CH(annel) or button to point to "AUTO MEMO". Then, press the VOL(ume) button. The tuner scans and memorizes all active channels in your area. . The TV distinguishes between standard TV channels and cable (CATV) channels. . When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. . When you press the CH(annel) or button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. . The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happ...