Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Batteries 13 Press to select or adjust from a particular nel) to CH 10 (previously viewed channel), installed with incorrect polarity may dam- menu. (for example: Language Selection, and pressing it a second time will return age the remote unit. from CH 10 to CH 3. 3) Replace the cover. 9 Channel Presetting, Closed Caption Selection, 13.DISPLAY button- Press to display the 12 Picture Adjustment, V-CHIP Set Up) channel number on the screen. If you press 6. CHANNEL (CH) ^/Ў buttons-Press to it again, the channel number will disappear. select memorized channel. 14.SLEEP button- Press the SLEEP button to 11 Press to select the setting mode from the display the sleep timer and start the func menu on the TV screen. 5 tion. The shut off time can be determined Press to select item you want to adjust in by the number of times you press the but 4 the picture control mode. ton. (0, 10, 20, 30,..90, 0 minutes) USING AUDIO/VIDEO INPUT JACKS 7. POWER button- Press to turn the TV ON When you use the AUDIO/VIDEO input 15.GAME button- Press to set the Game 10 and OFF. jacks, select “VIDEO1” or “VIDEO2” mode mode. Press the GAME button again to exit 8. Infrared Sensor Window- Receives the by pressing the INPUT SELECT button on the this mode. 3 infrared control signals from the remote remote control. (See USING AUDIO/VIDEO INPUT JACKS control unit. •To use the jacks on the back of the TV, select and PICTURE ADJUSTMENT.) 9. CHANNEL NUMBER buttons- Press two “VIDEO1”. 16.S-VIDEO INPUT jack- Connect to the S- digits to directly access the desired channel. •To use the jacks on the front of the TV, VIDEO output jack of a video camera or VCR 1. VIDEO (IN) jack- Connect to the video Remember to press a "0" before a single using the S-VIDEO cable (not supplied). select “VIDEO2”. output jack of a video camera or VCR. 17.ANT(enna). IN jack- Connect to an antendigit channel. Notes: +100 button- Press to select cable channels •You may also set the Game mode and 2. AUDIO (INPUT) L/R jacks- Connect to na, cable system, or satellite system. higher than 99. VIDEO2 at the same time by pressing the the left/right channel audio output jacks of 18.AC cord- Connect to a standard AC outlet 10.MUTE button- Press the MUTE button to GAME button on the remote control. a video camera or VCR. (120V/60Hz). turn off the sound portion of the TV pro- "GAME" appears on the TV screen. In this Note: The AUDIO (INPUT)L jack is for Note: Unwrap the AC cord completely gram. (Volume level display turns LIGHT case, connect the external source to the from the backcover before plugging the mono input. The sound is heard from both RED from LIGHT BLUE.) Press the AUDIO/VIDEO jacks on the front panel. cord into an AC outlet. MUTE button again or press the VOL(ume) (See PICTURE ADJUSTMENT.) speakers. Use this jack for monaural audio equipment to be hooked up. ^ or Ў button to restore sound. 3. HEADPHONE jack-To connect headphone 11.INPUT SELECT button- Press to select (not supplied) for personal listening. TV or the external input (VIDEO1 or 4. MENU button- Press to display the menu VIDEO2) mode. on the TV screen. (See USING AUDIO/VIDEO INPUT JACKS.) POWER 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN MUTE MENU GAME INPUT SELECT PREPARATION FOR USE 3) Press the VOL(ume) ^ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ^ or Ў button to select the channel you wish to put into memory or to erase from memory. Note: The display will disappear automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. ADD/DELETE AUTO PRESET CH . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. MTS (Multi-Channel Television Sound) System You can listen to a program in MTS stereo by following the steps below. To show the status, press the DISPLAY button on the remote control. Type of broadcast Regular -None- Stereo broadcast STEREO SAP Menu Selection MAIN MONO SAP -None--None- MONO STEREO SAPMAIN MAIN SAP: Second Audio Program, which means your program can also be received in a second language or sometimes a radio station. [To Select STEREO, MONO or SAP in Stereo broadcast] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "TV SOUND". 3) Press the VOL(ume) ^ or Ў button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].) : Press the VOL(ume) ^ or Ў button. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MONO] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [SAP] RESUME FUNCTION If the power fails or is disconnected while the TV is powered on, the TV will tu...