Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
- DisplayPort Extender Cable with Transmitter and Receiver x 1 - User’s Manual x 1 1.7 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.8 Installation Avenview FO-DP-XX-MM is composed of a Transmitter converting the graphic signal of a computer to optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted from the optical signal to electrical signal. The Transmitter should be connected to computer/media player DisplayPort connector and the Receiver should be connected to a monitor/TV with DisplayPort connector. Avenview FO-DP-xx-MM is designed to self-detect the resolution of the monitor and change the resolution accordingly. Follow these steps for connecting to a device: 1. Power on your display 2. Connect Transmitter to the PC and Receiver to the Display. 3. Connect the optical fiber between Transmitter and Receiver. 4. Restart the computer or media player. Section 2: Specifications Item Description Units FO-DP-XX-MM (Transmitter) FO-DP-XX-MM (Receiver) Unit Description DisplayPort Fiber Optic Transmitter DisplayPort Fiber Optic Receiver Video Bandwidth 10bit Deep Color / 60Hz Supported Resolution & Distance Up to WQXGA 2560 x 1600 @ 65 meters ( 210 feet) Optical Converter 4 ch 850 nm Multi-Mode VCSEL 4 ch GaAs PIN photo Diode Connector Type 20 pin DisplayPort Plug (Male) 20 pin DisplayPort Plug (Female) Fiber Type 50/125 .m Multi-mode glass fiber Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) 2.1 Electrical & Optical Specifications 2.1.1 Transmitter (Source) Module Parameter Symbol Min Type Max Units Power Supply Voltage Vcc +5.0 V Supply Current Icc 250 mA Power Dissipation Po 1.25 W Signal Diff. P-to-P Input Level 1 VTX-DIFF-PP1 0.34 0.4 0.46 V Diff. P-to-P Input Level 2 VTX-DIFF-PP2 0.51 0.6 0.68 V Diff. P-to-P Input Level 3 VTX-DIFF-PP3 0.69 0.8 0.92 V Diff. P-to-P Input Level 4 VTX-DIFF-PP4 1.02 1.2 1.38 V TX DC Common Mode VTX-DC-CM 0 2.0 V TX AC Common Mode VTX-AC-CM 20 mV Transmitter (Source) module of Model DPM includes 4 channel VCSEL (Vertical Surface Emitting Laser Diode) with 850 nm invisible laser radiation. Transmitter (Source) module of DPM is Class 1 Laser Product. 2.1.2 Receiver Module Parameter Symbol Min Type Max Units Power Supply Voltage Vcc +5.0 V Supply Current Icc 280 mA Power Dissipation Po 1.4 W Signal Diff. P-to-P Output Level 1 VTX-DIFF-PP-H 120 0.46 mV Diff. P-to-P Output Level 2 VTX-DIFF-PPR 40 0.68 mV RXDAC Common Mode VTX-DC-CM 0 20 V 2.2 Connector Pin Assignment 2.2.1 Transmitter (Male) Pin Pin Name Pin Pin Name 1 ML_Lane0(p) 2 GND 3 ML_Lane0(n) 4 ML_Lane1(p) 5 GND 6 ML-Lane1(n) 7 ML-Lane2(p) 8 GND 9 ML_Lane2(n) 10 ML_Lane3(p) 11 GND 12 ML_Lane3(n) 13 CONFIG1 14 CONFIG2 15 AUX_CH(p) 16 GND 17 AUX_CH(n) 18 Hot Plug Detect 19 Return 20 No Connect(DP_PWR) 2.2.2 Receiver (Female) Pin Pin Name Pin Pin Name 1 ML_Lane3(n) 2 GND 3 ML_Lane3(p) 4 ML_Lane2(n) 5 GND 6 ML-Lane2(p) 7 ML-Lane1(n) 8 GND 9 ML_Lane1(p) 10 ML_Lane0(n) 11 GND 12 ML_Lane0(p) 13 CONFIG1 14 CONFIG2 15 AUX_CH(p) 16 GND 17 AUX_CH(n) 18 Hot Plug Detect 19 Return 20 No Connect(DP_PWR) 2.3 Mechanical Specifications 2.3.1 Case Dimensions 2.3.2 Optical Cable Info Dimensions of DisplayPort Cable Items Unit Specifications DisplayPort Cable Make-up - Layer Stranding Drain Wires (Size/Stranded) mm(AWG) -0.203/7 (24) AL-Mylar Screen Shield - A helically Cable Outer Diameter Mm 7.40 ± 0.20 Jacket Color - Black Fiber Cable Characteristics Item Spec Unit Condition Storage Temperature -20 ~ 70 °C Spooled Operational Test 0 ~ 50 °C - Max. Tensile Load 245 N Min. Radius Bend 25 mm 40 Crush Resistance 490 N/50mm avenview-logo-whiteBG_Final.png Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document...