Войти:
Оценок - 3, средний балл: 4.7 ( )

Инструкция по эксплуатации Avenview, модель HDMI-C5-3X-SET

Производитель: Avenview
Размер: 715.65 kb
Название файла: HDMI-C5-3X-SET-UG.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


- HDMI-C5-3X-S x 1 - HDMI-C5-3X-R x 1 - Mini USB to USB Adapter x 2 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 2 1 1.7 Panel Description FRONT PANEL (Transmitter, HDMI-C5-3X-S) 1. HDMI Input 2. Mini USB Connector DIP Switch Under Transmitter 0 VIDEO Locks to Full HD 1080p 24-bit AUDIO Supports up to 7.1 Channel Output 1 VIDEO Locks to Full HD 1080p 24-bit AUDIO Locks to Stereo Audio Output 2 VIDEO up to Full HD 1080p 36-bit AUDIO Supports up to 7.1 Channel Output 3 VIDEO up to Full HD 1080p 36-bit AUDIO Locks to Stereo Audio Output 4 VIDEO Locks to HD 720p or 1080i 24-bit AUDIO Supports up to 7.1 Channel Output 5 VIDEO Locks to HD 720p or 1080i 24-bit AUDIO Locks to Stereo Audio Output 6 VIDEO up to 3D Full HD 1080p 36-bit AUDIO Locks to Stereo Audio Output 7 EDID Learning Learns EDID from Display If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0 1 2 REAR PANEL (Transmitter, HDMI-C5-3X-S) 1. HDMI OUT 2. Mini USB Connector DIP Switch HDMI-C5-3X-R (Receiver) Rotary control: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! DON NOT let the rotary arrow pass through 6 which will erase the EDID just learned and restore to default EDID. 1.8 Installation To setup Avenview HDMI-C5-3X-SET follow these steps for connecting to a device: 1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDMI-C5-3X-S). 2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDMI-C5-3X-R. 3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units. 4. Make sure CAT-5/5e/6 LAN cable is tightly connected and not loose. 5. Plug in 5V DC power cord to the power jack of the receiving unit HDMI-C5-3X-R. 6. Plug in 5V DC power cord to the power jack of the transmitting unit HDMI-C5-3X-S. 1.9 EDID Learning To learn EDID from the monitor/TV following these steps 1. Turn on HDMI-C5-3X-S. 2. Turn the Mode of HDMI-C5-3X-S counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7. 3. Use a HDMI cable to connect HDMI-C5-3X-S & the display (better not connect to video source). The LED on the RJ-45 of HDMI-C5-3X-S will dim and light again, which indicates the EDID learning process is finished. 4. Turn the Mode of HDMI-C5-3X-S clockwise from 7 to 0 (for surround sound) or 1 (for stereo). 5. Connect HDMI-C5-3X-S and the video source through a HDMI cable and enjoy the experience. 1.10 General Troubleshooting Problem Possible Solution No Image . Check if connection to the source and the display are correct. . Ensure that display device supports 480p, 720p and 1080p resolution Screen Defects Appear . This product supports up to 1080p (1920x1200) resolution. . Check the DVI and HDMI connection . If outputting from a PC. Check the maximum resolution range of the graphics card. Section 2: Specifications Item Description Units HDMI-C5-3X-S HDMI-C5-3X-R Unit Description HDMI 1.3a with 3D Transmitter HDMI 1.3a with 3D Receiver HDMI Compliance High Speed HDMI Deep Color & Full 3D Support HDCP Compliance Yes Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60 Resolution and Distance (24-bit) Full HD: (1080p) ~40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6) HD: (720p/1080i)-50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6) Audio Support Surround Sound (up to 7.1 Ch) or Stereo Digital Audio Equalization - 8 Level Digital Control Input TMDS Signal 1.2 Volts (peak-to-peak) Input DDC Signal 5 Volts (peak-to-peak, TTL) ESD Protection - Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge) - Core chipset — ±8kV Input 1 x HDMI 1 x RJ45 Output 1 x RJ45 1 x HDMI HDMI Connector Type A (19 pin female) RJ45 Connector WE/SS 8P8C with 2 LED indicators Rotary Switch Mode EQ Dimensions 3.3” X 1.5” x 0.8” (L x W x H) Power Supply Mini USB Power Consumption 1 Watt (max) Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) avenview-logo-whiteBG_Fina...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории