Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
. Use of supplies or parts not meeting our specifications. . Normal wear and tear. . Any other causes which does not relate to a product defect. . Removal, installation, and set-up service charges. 1.2 Safety Instructions The Avenview FO-HDM-1000M-EMI, HDMI Extender SET over Single Fiber Optic, has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-HDM-1000M-EMI should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. . Do not dismantle the housing or modify the module. . Dismantling the housing or modifying the module may result in electrical shock or burn. . Refer all servicing to qualified service personnel. . Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards . Keep the module away from liquids. . Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately. . Have the module checked by a qualified service engineer before using it again. . Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. 1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction Avenview FO-HDM-1000M-EMI optical HDMI extension module, is designed to let digital flat panel display extend over 1000 meters away from host based on HDMI standard by optical transmission technology. Its small package and transmit up to four video and one low-speed lane, while simultaneously receiving one low-speed signal, all on one multimode fiber. - High Speed and long distance transmission by 1 channel SC type Multi-mode Fiber - Supports resolution up to HDTV/1080P, PC/WUXGA(1920x1200) - Transmit up to 1000m (3300 feet) at 720p (1280 x 720) by multi-mode SC Type one fiber optic cable - Transmit up to 500m (1650 feet) at 1920 x 1200 by multi-mode SC Type one fiber optic cable - TMDS video signal and EDID data is transmitted by 1 channel multimode optical fiber - HDCP support by DDC channel - Supports 12Bit Deep Color - Small size for insertion into internal system - Optional external power supply (Automatic power switch is included.) 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - FO-HDM-1000M-EMI Transmitter x 1 - FO-HDM-1000M-EMI Receiver x 1 - Power Adapter x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.7 Installation Avenview FO-HDM-1000M-EMI is composed of a Transmitter converting the graphic signal of a computer to optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted from the optical signal to electrical signal. The Transmitter should be connected to computer and the Receiver should be connected to a monitor. Avenview FO-HDM-1000M-EMI is designed to self-detect the resolution of the monitor and change the resolution accordingly. Follow these steps for connecting to a device: To setup Avenview FO-HDM-1000M-EMI follow these steps for connecting to a device: 1. Power on your display 2. Connect Transmitter to the PC and Receiver to the Display. 3. Connect the optical fiber between Transmitter and Receiver. 4. Restart the computer. Section 2: Specifications Item Description Units FO-HDM-1000M-EMI (Transmitter) FO-HDM-1000M-EMI (Receiver Unit Description HDMI Transmitter over Fiber Optic HDMI Receiver over Fiber HDMI Compliance HDMI 1.3a HDCP Compliance HDCP 1.1 Video Bandwidth 2.25 Gbps / Channel Supported Resolution & Distance WUXGA 1920 x 1200 @ 500 meters ( 1650 feet) UXGA 1600 x 1200 @ 700 meters (2300 feet) 1280 x 720 (720p) @ 1000 meters (3300 feet) Optical Converter 4 Ch 850 nm Transmit OSA 911nm, 1 Ch VCSEL 980nm, 1 Ch PIN P/D Diode 4 Ch 850 nm Transmit OSA 911nm, 1 Ch VCSEL 980nm, 1 Ch PIN P/D Diode HDMI Connector HDMI A Type Plug Optical Connector 1 SC Connector Fiber Type 50/125 .m Multi-mode glass fiber Power Consumption 1.0W (max) 0.75W (max) Power Supply 100 ~ 240V 5V 2A DC Dimensions (L x W x H) 10...