Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
If you cannot get the audio and/or video output normally at the system installation, please change the DIP switch setting to default mode or even safe mode to verify the functionality of the device. 5 Set Pin#1 at ON[.] first then connect the HDMI Input to HDTV through a HDMI cable. Wait for 20 seconds. The EDID learning procedure will be finished. If you want to learn the EDID from another HDTV, you must set Pin#1 at OFF first and repeat this procedure. 1 2 3 4 5 6 7 1. Input Signal format indicator (Bright: HDMI Single, Dim: DVI Signal) 2. Rotary Switch 3. RJ45 IN: Connect RJ45 Source from HDMI-C5XD-S 4. Audio Out: Plug in Local Speaker 5. HDMI OUT: HDMI Local Output 6. HDMI Signal Out: RJ45 connection to connect to HDMI-C5XD-SR or HDMI-C5-3-R 7. Power Connector: 5V 4A DC 1.7.4 HDMI Output Format Selection When input signal exists, the output format LED turns on. If the input HDMI source is HDMI 1.3 format, you can set the output format to HDMI 1.2 mode and Red LED will be on. If the input HDMI source is HDMI 1.2, the output format is always set to HDMI 1.2. 1.8 Installation (HDMI-C5XD-S) To setup Avenview HDMI-C5XD-S follow these steps for connecting to a device: 1. Turn off all devices including monitors / TV 2. Connect a Local HDMI display to the HDMI out of the HDMI-C5XD-S and then connect a speaker to the 3.5mm audio socket. 3. Connect to a HDMI source (such as a Blu-Ray Disc player) 4. Connect HDMI-C5XD-S to HDMI-C5XD-SR or HDMI-C5-3-R from RJ45 Out with CAT5 / CAT5 cable 5. Plug in 5V 4A DC Power (supplied). 6. Power on the HDMI display 7. Power on HDMI Sources. 1.9 Installation (HDMI-C5XD-SR) To setup Avenview HDMI-C5XD-SR follow these steps for connecting to a device: 1. Turn off all devices including monitors / TV 2. Connect a Local HDMI display to the HDMI out of the HDMI-C5XD-SR and then connect a speaker to the 3.5mm audio socket. 3. Connect to RJ45 cable to HDMI Signal IN which is connected to RJ45 OUT on HDMI-C5XD-S 4. Connect HDMI-C5XD-SR to another HDMI-C5XD-SR for cascading or HDMI-C5-3-R from RJ45 Out with CAT5 / CAT5 cable 5. Plug in 5V 4A DC Power (supplied). 6. Power on the HDMI display 7. Power on HDMI Sources. Section 2: Specifications Item Description Units HDMI-C5XD-S HDMI-C5XD-SR Unit Description HDMI 1.3 Transmitter with Local Output HDMI 1.3 Transceiver with Local Output HDMI Compliance HDMI 1.3c HDCP Compliance Yes Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60 Resolution and Distance Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6) HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6) Audio Support Surround Sound (up to 7.1 Ch) or Stereo Digital Audio Equalization - 8 Level Digital Control Input TMDS Signal 1.2 Volts (peak-to-peak) Input DDC Signal 5 Volts (peak-to-peak, TTL) ESD Protection - Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge) - Core chipset — ±8kV Input 1 x HDMI 1 x RJ45 Output 1 x HDMI 1 x Rj45 1 x 3.5mm Audio 1 x HDMI 1 x RJ45 1 x 3.5mm Audio HDMI Connector Type A (19 pin female) RJ45 Connector WE/SS 8P8C with 2 LED indicators Audio Connector 3.5mm DIP Switch Yes - Dimensions (L x W x H) 4.3” x 8.3” x 1.1” Power Supply 5V 4A DC Power Consumption 3 Watt (max) Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Tempearture -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3 3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable 300m or 1000ft form) can transmit a lot longer signals than stranded LAN cables (usually in patch cord form). Shielded STP cables are better suit than unshielded UTP cables. A solid UTP CAT5e cable shows longer transmission length than stranded STP CAT6 cable. For long extension users, solid LAN cables are your only choice. 4. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance. 5. To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use shielded LAN cables to improve EMI problems, which is worsen in long transmission. 6. Because the quality of the LAN cables has the major effects in how long transmission distance will be made and how good is the received display, the actual transmission length is subject to your LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended. 7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1] generally can produce better transmission performance among all HDMI inputs....
Эта инструкция также подходит к моделям:Телевизоры - HDMI-C5XD-S (975.89 kb)