Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
1.4 Introduction The Avenview HDM-C5-3-R HDMI 1.3 Receiver over Single CAT5 Extender boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one cost effective LAN cable, users can easily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other HDMI sources compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. With the state-of-the-art Silicon Image chipsets equipped, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. This flexibility makes HDCP compliant DVD players or PS3 transmit utmost high quality video and audio with a greater distance at the minimal cost, when integrating several components apart. The Receiver (HDM-C5-3-R) equalizes the sent TMDS multimedia data from Transmitter (HDM-C5-3-S / HDM-C5XD-S / HDM-C5XD-SR). The transmission distance between the sending and receiving units can be up to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization control knob on the receiving unit, users can adjust the equalization strength to the received TMDS signals accordingly, and therefore optimize the transmission distance between source and destination. - Silicon Image chipset embedded for best compatibility and reliability HDMI video input supports up to 1080p resolution - HDMI 1.3c Compliant - HDCP 1.1 compliant - Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution (1080i or 720p at 8 bit color depth) - Extend the transmission length up to 40m (130ft) from the HDMI sources under Full HD resolution (1080p at 8 bit color depth) - Extend the transmission length up to 20m (65ft) from the HDMI sources under Full HD resolution (1080p at 12 bit color depth) - Minimize the cable skew by adjustable 8-level equalization control - Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission - DTS-HD and Dolby True HD high bit rate audio support - Allows cascading - Perfectly integrated with other HDM-C5-3 Series products 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - HDM-C5-3-R x 1 - Power Adapter (+5VDC, 4A) x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. Connector_HDMI HDMI-IN Mode Untitled-1 Note for EDID (Extended Display Identification Data) learning 1. Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s HDMI-IN and turn Mode to 7 so the TX can learn the EDID information from the connected HDTV. The LED on the RJ45-OUT of TX will dim and light again in a few seconds, which indicates the EDID learning process is completed. 2. Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and enjoy the experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the EDID just learned and restore the default EDID. 1.7 Panel Description FRONT PANEL (Transmitter, HDM-C5-3-S) 1. Rotary Switch 2. HDMI Input DIP SWITCH 0 HDMI Mode with Surround Sound Audio Output 1 HDMI mode with Stereo Audio Output 2 DVI Mode 3 Reserved 4 Reserved 5 Reserved 6 Use Default EDID 7 Learn EDID From the Display RJ45-OUT +5V DC HDMI-OUT EQ Untitled-1 Connector_HDMI EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = Strongest – Weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience. RJ45-IN +5V DC REAR PANEL (Transmitter, HDM-C5-3-S) 1. 5V 4A DC Power Connector 2. RJ45 Out FRONT PANEL (Receiver, HDM-C5-3-R) 1. Rotary Switch 2. HDMI Out REAR PANEL (Receiver, HDM-C5-3-R) 1. 5V 4A DC Power Connector 2. RJ45 In If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0 The most important thing is don’t let the rotary arrow pass through 6 which will erase the EDID just learned and restore to default EDID. 1.8 Installation To setup Avenview HDM-C5-3-R with HDM-C5-3-S follow these steps for connecting to a device: 1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDM-C5-3-S). 2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDM-C5-3-R. 3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units. 4. Make sure CAT-5/5e/6 LAN cable is tightly co...