Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
. Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards . Keep the module away from liquids. . Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately. . Have the module checked by a qualified service engineer before using it again. . Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. 1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The Avenview SPLIT-HDSDI-6 receives one SDI input, perfectly duplicates it, and re-transmits four SDI outputs for real time multi-viewing. It is a reliable video device splitting a SDI or HD-SDI video source to four HD-SDI or SD-SDI displays at the same time. 1.5 Features - HD/SD dual-rate distribution - 6 separately buffered outputs - HD cable equalization (Beldon 1694A) - Dual color LED indication of input lock and rate - Pass all ancillary data - Provides automatic input cable equalization up to 300m (1000ft) - Inter-locked power supply for better fixedness - Easy installation 1.6 Package Contents Before you start the installation of the converter, please check the package contents. - SPLIT-HDSDI-6 x 1 - Power Adapter (+5VDC) x1 - User’s Manual x1 1.7 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.8 Panel Description FRONT PANEL 1. HD/SD-SDI Input 2. LED – Reserved 3. LED – Power Indicator 4. 5V DC Power Jack REAR PANEL 5. HD/SD-SDI Output 1 6. HD/SD-SDI Output 2 7. HD/SD-SDI Output 3 8. HD/SD-SDI Output 4 Bottom Panel These DIP switches are reserved for the SPLIT-HDSDI-6-RS or SPLIT-HDSDI-6-RS that has re-clocking functionalities. No use for this model. SPLIT-HDSDI-4 Section 2: Installation Follow these instructions for installation of SPLIT-HDSDI-6: 1. Ensure SPLIT-HDSDI-6 and all other source devices are turned off 2. Connect a camera or other HD/SD-SDI device to Input of SPLIT-HDSDI-6 3. Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to SPLIT-HDSDI-6 outputs 4. Turn ON all devices connected to output of SPLIT-HDSDI-6 5. Plug power adapter to 5V DC power jack of SPLIT-HDSDI-6 SPLIT-HDSDI-6 4 HD/SD-SDI Displays HD/SD-SDI Camera Section 3: Specifications Item Description Model SPLIT-HDSDI-6 SDI Standards SD-SDI & HD-SDI Auto HD/SD-SDI Detection Yes Supported Protocols SMPTE 259M, SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps) Video Bandwidth [1.485Gpbs & 1.485/1.001Gbps] Data Rates 270 / 1483 / 1485 Mbps Supported Video [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30 [SD] NTSC@59.94Hz, PAL@50Hz SDI signal type SMPTE-292M, SMPTE-259M Output impedance 75. Reclocking function No Cable equalization [HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft) Audio support Yes RP-918 pathological patterns Immune Input Connectors 1x BNC [SDI] Output Connectors 4x BNC [SDI] BNC connector 75. inter-locked socket Eye pattern characteristics Amplitude: Within 800mV ±3% (<10%) Rise overshoot: Less than 2% (<10%) Fall overshoot: Less than 2% (<10%) Long time jitter: 0.195. (<1.0.) Timing jitter: 0.195. (<1.0.) Alignment jitter: 0.127. (<0.2.) Dimensions 5.7” x 3.2” x 1” (L x W x H) Weight 330g Power Supply 5V 4A DC Power Consumption 10 Watts (max) Operating Temperature 0~40°C [32~104°F] Storage Temperature -20~60°C [-4~140°F] Relative Humidity 20~90% RH [no condensation] Avenview.jpg Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, functio...