Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Magnavox, модель MC192DMG

Производитель: Magnavox
Размер: 652.47 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


• To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen. • You cannot pause an OTR. • To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. • You cannot record if DEFEAT RECORDING is ON. Details are on page 36. • You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. MC132DMG/MC192DMG 3/22/02 1:21 PM Page 31 Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) Audio Cable from AUDIO OUT to AUDIO In VIDEO AUDIO OUT IN Video Cable from VIDEO OUT to VIDEO In 1 1 Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made. 2 2 The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit. 3 3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automatically. 4 4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the screen. The TV/VCR is now in Line Input mode. 5 5 Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen. 6 6 Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. Copying will begin. 7 7 To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder). VIDEO AUDIO POWER AUDIO and VIDEO In Jacks on TV/VCR Helpful Hints • Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently. • Make sure all connections are secure. Otherwise, you may not record both picture and sound. • Programs that are copyright protected may not record clearly. MC132DMG/MC192DMG 3/22/02 1:21 PM Page 32 32 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: . The clock is set. If not, CLOCK MUST BE SET appears, followed by the SET CLOCK menu. Details are on pages 12-17. Channels are set. Details are on page 10. . A tape is in the TV/VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program. Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1. 1 1 Press the MENU button. > PRIM. SETUP PRESS B VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2 2 Press the PLAY/ button or the STOP/ button to select VCR PROGRAM, then press the F.FWD/B button. VCR PROGRAM > ONCE DAILY(MON-FRI) WEEKLY PROGRAM REVIEW SELECT KL CHOOSE B TO END PRESS EXIT 3 3 Press the PLAY/ button or the STOP/ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button. ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away. DAILY: The TV/VCR will record every day from Monday to Friday – starting at the same time and recording the same channel for the same length of time. WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week. DAILY PROGRAM (MON-FRI)Daily PROGRAM -1 2 3 4 5 6 7 8Recording (example) SELECT PROGRAM NUMBER TO END PRESS EXIT TRACKING MUTEREC/OTR SPEED MEMORY 0 8 97 5 64 2 31 PAUSE/STILL ALT.CH STOP F.FWD PLAY REW VOL. STATUS/EXITMENU POWER SLEEP/WAKE UP CH. CLEAR 1 2-3 Helpful Hints • With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place during the power failure. • You cannot set a timer recording if DEFEAT RECORDING is ON. Details are on page 36. MC132DMG/MC192DMG 3/22/02 1:21 PM Page 33 Timer Recording (cont’d) 33 4 4 Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not been stored yet). NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select...

Эта инструкция также подходит к моделям:
Телевизоры - MC132DMG (652.47 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории