Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
DVD+R: DVD Recordable. DVD+Rs can be recorded on only once. DVD+RW: DVD Rewritable. DVD+RWs can be recorded on multiple times. Region Codes This TV/DVD has a Region One (1) DVD Player. DVDs must be labeled for ALL regions or for Region 1 in order to play on the unit. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this TV/DVD. The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin Islands, and small regions near Australia. A DVD labelled for a specific region can only play on DVD Players with the same region code. Color Systems DVDs are recorded in different color systems throughout the world. The most common color systems are NTSC (which is used primarily in the United States and North America), PAL, and SECAM. The DVD Player of this unit uses NTSC, so DVDs you play must be recorded in the NTSC system. You cannot play DVDs recorded in other formats. The color system of the DVD may be listed on the DVD or on the Disc case. Unacceptable Discs If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen. The following Discs will not play on this DVD Player. • CD-ROM • Compact Disc-Interactive (CD-I) • DVD-RAM • Video Single Disc (VSD) • DVD-ROM • DVD-Audio • Super Audio CD (SACD) (The Audio CD layer of a hybrid SACD may play.) Audio of the following discs might play, but video will not be accessible. • Compact Disc-Graphic (CD-G) • Compact Disc-Video (CD-V) TD007.QX33 03.3.14 3:00 PM Page 7 Remote Control Setup 7 Putting Batteries in the Remote Control 1 1 1 Remove the battery compartment lid on the bottom of the remote control by sliding the lid down and off, following the direction of the arrow on the lid. 2 2 Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. 2 3 3 Replace the battery compartment lid. Recycling Guidelines/Battery Safety . Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment. . Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit: • Install ALL batteries correctly, with the + and markings on the battery aligned as indicated on the unit; • Do not mix batteries, for example, old with new or carbon with alkaline; and • Remove batteries when the unit will not be used for a long time. Using the Remote Control Point the remote control at the remote sensor on the front of the TV/DVD. Details are on page 16. Do not put objects between the remote and the TV/DVD. 3 TD007.QX33 03.3.14 1:50 PM Page 8 8 Hooking Up the TV/DVD 1 1 Hook up your TV/DVD using one of the connections shown. Connect a Cable TV AUDIO OUT DC 13.2V L R COAXIAL ANT. ANT. INOUT AUDIO OUT DC 13.2V L R COAXIAL ANT. ANT. Connect an RF coaxial cable (not supplied) to the OUT Jack on the Cable Box/ Satellite Receiver and to the ANT(enna) Jack on the TV/DVD. signal or an antenna to the ANT(enna) Jack.AHooking Up Your TV/DVD with a Cable TV Signal or Outdoor Antenna Connect the Cable TV or Satellite signal to the IN Jack on the Cable Box/Satellite Receiver. B Hooking Up Your TV/DVD with a Cable Box/Satellite Receiver To view any channel, set the TV/DVD to the output channel (channel 03 or 04) of the Cable Box/Satellite Receiver. Then, select channels at the Cable Box/Satellite Receiver. Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single Antenna Out jack (RF coaxial or 75 ohm) shown here. If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/DVD. Press SELECT on the remote to set the TV/DVD to AUX, not channel 3 or 4. Select channels you want to watch at the Cable Box/Satellite Receiver as usual, leaving the TV/DVD on AUX. TD007.QX33 03.3.14 1:50 PM Page 9 Hooking Up the TV/DVD (cont’d) 9 C C Hooking Up Your TV/DVD with the supplied Rod Antenna To install the supplied rod antenna, push the stem of the antenna into the antenna hole at the top on the rear of the TV/DVD. Connect the antenna wire to the ANT(enna) Jack on the rear of the TV/DVD as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture. D D Hooking Up Your TV/DVD to Another Video Source (VCR, DVD Player, Camcorder, etc.) You may need this connection if you want to play Discs or tapes on other equipment but watch them on...