Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Quasar, модель SP2729

Производитель: Quasar
Размер: 1.46 mb
Название файла: SP2729V.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Then enter a 3 digit code with the Remote Control Keypad. “SET should be highlighted after entering the last digit. IMPORTANT NOTE: Use a code you can easily remember or write the code on a piece of paper. 6. Press ^ after entering three digit code. “Game Guard Locked” will display On Screen. Unlock Game Guard To unlock the Game Guard feature, repeat steps 1 through 3. Enter the same 3 digit code previously used in step 5 with Remote Control Keypad. . V V ■■■ I;';'* : CI/oX LOCKACTIVATED ENTËRiÇÔOElTOlëHANGEiSETjTINGS Enter Same 3 Digit Code Previously Used If 3 Digit Code Is The Same INVALID CODE ENTERED If 3 Digit Code Is Not The Same GAME GUARD LOCKED Game Guard Activated This feature allows you to enter the call names of up to 30 stations into memory (using up to 4 characters for each station). The Channel Caption will then display along with the channel number when changing channels or pressing RECALL Helpful Hints:__ When the Maximum amount of station identifiers are entered, “FULL” will be displayed in the caption position. CH03 KXYZ .Channel Caption (Station Identifier) ACTION 1. Press O . 2. Press ^ or^ and ^3 or ^ to highlight the Channel Caption Icon. ACTION 3. Press O to display the Channel Caption Menu. IESPN mm ie hfÄN N EIÄG A RI IO Nl 5BBB1 oc> CHANNEL' 4. Press ^3 or or use the Remote Control Keypad to enter the channel number you wish to assign a Station Identifier. 5. Press ^ to highlight ENTER CAPTION. 6. Press ^9 or to select first character in Station Identifier. Then press to move cursor to the second position and repeat until the complete Station Identifier is entered (up to 4 characters). 7. Press ^ or^ to highlight ENTER CHANNEL NUMBER. Then repeat steps 4 through 6 to continue adding Channel Station Identifier(s). ACTION 8. Press O twice to exit menus. NOTE: To delete a Channel Caption (Station Identifier) from memory all four character positions in the “ENTER CAPTION” area must display a dash mark (-). Timer Features Sleep Timer This feature is used for automatic turn off in 30, 60 or 90 minutes. Display will flash 3,2 and 1 to indicate the last three remaining minutes prior to turn off. The Recall display will also appear. NOTE: This feature will be disabled when Auto Power On is activated. ACTION 1. Press O . 2. Press ^ or& and ^3 or ^ to highlight the Timer Icon. 3. Press ACTION O to display the Timer Control Menu. kTIMERlCONTRO« HSLEËP:flMËR?^;" NO : • waaisumj uuABAi m , oo ^ oo (SÏÏ? oo g oo s'- E® B> 4. Press to select NO, 30, 60 or 90 minutes (Sleep Timer will be activated). ACTION 5. Press O twice to exit menus. NOTE: To deactivate Sleep Timer repeat steps 1 through 4. In step 4 select “NO” instead of minutes. Helpful Hints: Press the RECALL button to display the remaining minutes for Sleep Timer, the status will display in the bottom left corner. 18 Timer Features (cont.) Special Feature: Automatic turn “OFF” after 90 minutes. The TV has a special feature that will shut itself OFF after 90 minutes when turned ON by the program timer unless a function key is pressed during the 90 minutes. This feature is useful so that the TV will not remain ON unattended for an extended period of time. Programming the OFF timer will cancel the automatic OFF Special Feature. Program Timer This feature is capable of turning the TV on, tuned to a desired channel and off at a predetermined time (one day or daily). The clock must be set for this feature to operate. (Refer to the Set-Up Menu to set time.) NOTE: This feature will be disabled when Auto Power On is activated. ACTION 1. Press O . 2. Press ^ or^ and ^3 or ^ to highlight the Timer Icon. ACTION 3. Press O to display the Timer Control Menu. 4. Press ^ to highlight ON (time). 5. Press ^3 or E5 repeatedly to set hours (set AM/PM accordingly). 6. Press & to highlight the minutes position. 7. Press ^9 or ^ repeatedly to set minutes. 8. Press ^ to highlight OFF (time). mMERlCONTROa ; COS) “area PROGRAM i-:< 8 OS) gsb 9. Repeat steps 5 through 7 for setting OFF (time). 10. Press ^ to highlight CHANNEL 11. Press ^9 or or use the Remote Control Keypad to enter the channel number desired when the set turns “ON”. 12. Press ^ to highlight SET. iTIMERlCONTROU œpŒïj es® PROGRAMiTJMER CHANNEM3 SET NO 13. Press ^ to select: • NO - not activated • ONE DAY - activated • DAILY - activated ACTION 14. Press O twice to exit menus. NOTE: To deactivate Program Timer select NO in step 13. Helpful Hints: If the Program Timer “ON” functions while the set is operating, the set will automatically tune to the channel designated in the Timer Program. 19 Set-Up Features Set Time Clock (when set) will display on screen at initial “Turn On”, after a channel change and when pressing the RECALL button. The time must be set first in order to operate the Program ON/OFF Timer. NOTE: This feature will be disabled when Auto Power On is activated. ACTIO...

Эта инструкция также подходит к моделям:
Телевизоры - SP2729 (1.46 mb)
Телевизоры - SP2729U (1.46 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории