Войти:
Оценок - 5, средний балл: 3.6 ( )

Инструкция по эксплуатации RCA, модель MM27110

Производитель: RCA
Размер: 2.77 mb
Название файла: 1b573adc-0d25-4210-a6a5-f32cafc399f7.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


MUTE Reduces the monitor’s volume to its minimum level. Press again to restore the volume. SKIP Press once before changing channels and the monitor will wait 30 seconds before returning you to the original channel. Press repeatedly to add more time. CH + or CH -Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels. In DVD mode, pressing CH buttons skips chapters. VOL – or VOL + Decreases or increases the monitor’s volume. SOUND Press once to display the audio processor choice list. Point and select to choose a different processor or press CLEAR to exit. GO BACK Returns you to the previous channel or previous screen in the menu system. GUIDE Brings up and exits the GUIDE Plus+ Gold System. In SAT•CABLE mode, brings up available on-screen guides. INFO Brings up channel information; press again to clear the screen. Move (Arrows) Used to point to different items in the menu system and adjust the menu controls. Also moves the PIP window when no menus are on the screen. OK When in the menu system, selects highlighted items or returns you to the previous menu. MENU Brings up the Main menu and selects highlighted items. When in VCR mode, it functions as a PROGRAM button. LED STOP PAUSE TVON OFF AUXDVD PIP SWAP CH CTRL PLAY FORWARD REVERSE SOUND GO BACK CH + CH - VOLVOL SKIPMUTE INFO MENU OK CLEAR GUIDE ANTENNA 1 2 3 4 5 6 7 8 9 0 VCR1 VCR2 SAT•CABLE REC•VCR+ RESET WHO•INPUT NOTE The VCR1, DVD, VCR2, and SAT•CABLE buttons also turn on most RCA, GE, and PROSCAN products. Using the Remote CLEAR Removes any menu or display from the screen and returns you to normal viewing. (0-9) Number Buttons Enters channel numbers and time settings directly though the remote control. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the “1” button until “1” and two dashes (– –) appear, then add the second two. Example: to tune to channel 123, press and hold 1 until “1– –” appears, release the 1 button and then press 2, and 3. WHO•INPUT In TV mode, press to toggle through the available input sources (VID1, VID2, VID3, FRONT, last channel, VGA1, VGA2, component input). In SAT mode, press to select available channel lists (RCA, GE, and PROSCAN products only). ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in satellite mode. REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE If programmed, provides transport control for some remote-controllable VCRs, DVD players, laserdisc players, tape decks, and CD players. Pressing REC•VCR+ when using the GUIDE Plus+ System sets the VCR to record a program. PIP Brings up the small picture-in-picture window. Press again to remove the PIP window. (See “PIP Feature” later in this manual for more information about using PIP.) SWAP Swaps the main picture with the PIP window. CH CTRL Selects the picture window, (that is, the main or PIP window) to be changed by the CH ^ (channel up) or CH v (channel down) buttons. RESET Resets picture quality controls to the Bright Lighting Picture Control Preset. Point and select to choose a different Picture Control Preset. Also used to reset the settings in a menu, such as the Parental Controls menu. Using the WHO•INPUT button Use the WHO•INPUT button to scroll through the available input channels and view components you have connected to the monitor. 1. Press TV to place the remote in TV mode. Make sure that the component you want to view is turned ON. 2. Press WHO•INPUT to tune to an available input channel. 3. Continue to press the WHO•INPUT button to scroll through the input channels. Programming the Remote The universal remote can be programmed to control most brands of remote controllable VCRs, satellite receivers and cable boxes. The remote is already programmed to control most RCA, GE, and PROSCAN TVs, VCRs, DVD players, laserdisc players and satellite receivers. Modes of Operation Because this universal remote can control several different components (DVD player, VCR, Cable Box, etc.) it uses operational modes triggered by the component buttons. For example if you want the remote to control the TV, you would press the TV button to put the remote into TV mode before you could control the TV. Using the Remote You’ll use these buttons when you program the remote. The remote may not operate all models of all brands. PLAY REVERSE STOP VCR1 ON • OFF TV DVD VCR2 AUX SAT•CABLE Testing the Remote To determine whether the universal remote needs to be programmed, turn a device ON, such as a VCR, point the remote at the VCR, and press the VCR1 button. Then press POWER or CH ^ (channel up) or CH v (channel down) to see if the VCR responds to the remote commands. If not, the remote needs to be programmed. Programming the Remote Using Automatic Code Search The following instructions can be used to program the remote to control each of the devices connected to your monitor. If you want to exit the automatic code search withou...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории