Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
No objects filled with liquids, such as vases, shall be placed on the apparatus. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. See marking on back/bottom of product. Caution: The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is located/installed near the equipment and is easily accessible. Caution: To prevent electric shock, match the wide blade of the plug to the wide slot of the electrical outlet and fully insert. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, con ve nience re cep ta cles, and the point where they exit from the apparatus. 10. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the ap pa ra tus has been exposed to rain or moisture, does not op er ate normally, or has been dropped. Important information Notice to Users The system may cause interference to a TV or radio even when it is operating properly. To determine whether the system is causing the interference, turn it off. If the interference goes away, the system is causing the interference. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. • Contact your dealer for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Specifications and features are subject to change without notice. Product may vary from that shown. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Powered HDMI Repeater Thank you for choosing the HD588 Powered HDMI Repeater. This is a stateof- the-art HDMI solution, designed to give improved performance for HDMI connections. Please read this installation guide carefully before use. What’s in the box HDMI Repeater Power Supply Snap-On Mounting Bracket Mounting Screws with Drywall Anchors Piece of Velcro® Tape Key features • Allows longer runs of HDMI cable without signal loss • Supports all HDMI formats, including 1080p • Red and green indicators for easy installation Specifi cations Input 1 HDMI Type A Output 1 HDMI Type A Video Formats 480i, 480p, 720p, 1080i, 1080p Computer Formats VGA, SVGA, XGA, SXGA, UXGA Dimensions without bracket55.6(L) x 45.8(W) x 18.8(H) mm with bracket 55.6(L) x 49.8(W) x 21.5(H) mm Note: Audiovox reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Powered HDMI Repeater Connecting the repeater SOURCE 1. Attach the HDMI cable going to your digital video source (DVD Player, A/V Receiver, Satellite Receiver, etc.) to the “Source” HDMI jack on the HD588. DISPLAY IMPORTANT: 24AWG cables are recommended for all connections. 2. Attach the ...