Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
2) The button [AUTO] is used to adjust position of picture automatic and it is effective only onVGA mode. The button [POSITION] is used to adjust the position ofpicture. The button [CLOCK] and [PHASE] can adjust quality of picture minutely, and they are used less. Auto Clock Phase Position I/p info 3) In HDTV mode ,Clock can not be select. 4) In DVI mode,I/P info can be select only. Teletext Operations Selecting teletext mode Select the channel that is broadcasting the desired Teletext program. Press [ TEXT ] button and alternate between Teletext mode and normal mode. Note: All the operations below should be under the Teletext mode except TIME operation. Page selection You can directly input your desired page number by pressing [0-9] buttons. You can sequentially read pages by pressing [CH+ or CH-] button. Hold Some Teletext information is contained on more than one page, the pages automatically changing after a given reading time. Press [ S-Video ] button to stop the page changing. Press [ S-Video ] button again to allow the page to change. Reveal Some Teletext pages contain quiz or questions with hidden answers. Press the [ Source ] button to see the answers. Press the [ Source ] button again to hide the answers. Cancel When a page is selected in Teletext mode it may take some time before it becomes available. Press the [ YPbPr ] button to switch to the TV mode. When the required page is found, the page number will appear at the top of the TV picture, press the [ YPbPr ] button to return to the selected Teletext page. Note: You can not change TV program while in this mode. -15 Using the TV features Teletext Operations Sub code Some Teletext pages contain sub page that require you to input the sub code. Press [ Zoom ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need. Mix You can mix Teletext with TV pictures, which means transparent teletext. Press [ Swap ] to mix, and press [ Swap ] again to cancel the mixed effect. Size (top/bottom/full) Press the [ PC ] button to display the TOP HALF of the page. Press again to display the BOTTOM HALF of the page. Press again to return to a FULL PAGE display. Note: Changing pages reverts to a FULL PAGE display. Index Teletext index page guides you quickly to your desired page. Press [ Vedio ] button to enter index page. Fast text The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages transmitted by FAST TEXT broadcast. -16 Appendix The SCART interface Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment. Arrangement 1 is the original and allows for composite video input/output, RGB inputs and stereo audio input/output. Arrangement 2 allows for composite video input/output,and stereo audio input/output. Cation:The output of video and audio are always from turner of R F. Arrangement 3 allows for composite video input, S-Video inputs,and stereo audio input/output. TV can auto check aspect ratio in scart. Scart Connector Pinout Details SCART arrangement 1 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.5V rms <1kohm 4 Ground (audio) -- 5 Ground (blue) -- 6 Audio input A (left) 0.5V rms >10kohm 7 Blue input 0.7V 75ohms 8 Function select (AV control) High (5-12V) - AV mode Low (0-2V) - TV mode Mid(5-8V)-Wide-screen >10kohm 9 Ground (green) -- 10 --- 11 Green input 0.7V 75ohms 12 --- 13 Ground (red) -- 14 Ground (blanking) -- 15 Red input 0.7V 75ohms 16 RGB switching control High (1-3V) - RGB Low (0-0.4V)- Composite 75ohms 17 Ground (video input & output) -- 18 Ground(RGB Switching Control) -- 19 Video output (composite) 1V including sync 75ohms 20 Video input (composite) 1V including sync 75ohms 21 Common ground (shield) -- -17 Appendix SCART arrangement 2 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.5V rms <1kohm 4 Ground (audio) -- 5 Ground -- 6 Audio input A (left) 0.5V rms >10kohm 7 --- 8 Function select (AV control) High(5 12V)- AV mode Low (0-2V) - TV modeMid(5-8V)-Wide-screen >10kohm 9 Ground -- 10 --- 11 --- 12 --- 13 Ground -- 14 Ground (blanking) -- 15 -0.3V 75ohms 16 --- 17 Ground -- 18 Ground -- 19 Video output 1V including sync 75ohms 20 Video input 1V including sync 75ohms 21 Common ground (shield) -- WARNING: Do NOT attempt to work on ANY equipment unless you KNOW what you are doing. Notes: Y/C can not be displayed in the PIP source. Cleaning and care WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1) Unplug the TV to avoid possible shock hazard. 2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage ...
Эта инструкция также подходит к моделям:Телевизоры - PDP4220EU (4.15 mb)
Телевизоры - PDP4220EU (4.15 mb)