Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system. • On-screen 3 Language Display -This TV can display the on-screen language in English, Spanish or French. • Sleep Timer -Operable from the remote control, the TV can be programmed to turn off automatically (from 10 to 120 minutes, in 10-minute increments). • Memory Back Up -This system prevents loss of memorized channel selections in case a power interruption to the TV should occur. • V-Chip -The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-Chip will allow you to set a restriction level. (designed to work with the U. S. V-Chip system only) • Picture Control Adjustments -The on-screen display allows precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT. • Closed Captioned Decoder -Displays closed captions or text on-screen (when available). • Lock feature -This feature has three functions, LOCKING CHANNELS, LOCKING VIDEO INPUT and SETTING THE GAME TIMER. • Programmable ON Timer -Allows you to automatically turn on the TV at a set time. LOCATION OF CONTROLS FRONT BACK ANT. 78 POWER MENU – SET + CHANNEL VIDEO AUDIO ENTER RESET VOLUME 61 3 542 1. POWER Button -Press to turn the TV on or off. 2. Remote Sensor -Signals from the Remote Control unit are received here. 3. POWER indicator -Lights up when the power is turned on. 4. CHANNEL s /t Buttons -Press to select a higher or lower numbered channel set into memory. (ENTER Button) -Press to enter or select information for on-screen operations. (RESET Button) -Press, while in the on-screen menu mode, to reset the on-screen picture adjustments to their factory preset positions. 5. VOLUME s /t Buttons -Press to raise or lower the level of the sound. (MENU Buttons) -Press both VOLUME s /t buttons at the same time to display the on-screen menu functions. (SET + / – Buttons) -Press to select the desired setting during on-screen operations. 6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be connected here. 7. VHF/UHF IN (ANT.) Jack - Connect a VHF/UHF antenna or CATV cable to this jack. 8. AC Power Cord - Plug into an outlet with 120V, 60 Hz AC power only. REMOTE CONTROL MENU VOL – SLEEP MUTE CH RTN RECALL VOL + ENTER CH – CH + 1 2 3 4 5 6 7 0 8 9 – SET + 1/2CAP/TEXT RESET TV/VIDEO CT-836 POWER 1. POWER Button -Press to turn on the TV. Press again to turn off the TV. 2. Direct Channel Selection Buttons (0-9) -Allows direct access to any channel. 3. CH RTN Button -Repeatedly press CH RTN to toggle back and forth between the last two channels you tuned. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4. SLEEP Button -To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, ······ 20, 10, 0. After the sleep time is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the sleep timer function is operating. To confirm the sleep time setting, press the SLEEP button once and the remaining time will be momentarily displayed. To cancel sleep time, press the SLEEP button repeatedly until the display turns to 0. 5. VOL (VOLUME) + / – Buttons -Press the + button to increase, or the – button to decrease the volume level. 6. MENU Button -Press to display the on-screen menu function. 7. SET + / – Buttons - Press to select the desired setting during on-screen operations. 8. RESET Button -Press to reset the on-screen picture adjustments to their factory preset positions. 9. TV/VIDEO Button -Switches between the TV and external device inputs. 10. RECALL Button -When you press this button, the channel number will appear in the upper right corner of the screen. Press the button again to remove it from the screen. 11. MUTE Button -To turn off the sound, press this button once. The TV will be silenced and the word “MUTE” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL + or – buttons. 12. CH (CHANNEL) + / – Buttons -Press the + button to change to a higher numbered channel set into memory. Press the – button to change to a lower numbered channel set into memory. 13. ENTER Button -Press to enter or select information for On-screen operations. 14. 1/2 Button -Switches between Channel 1 and Channel 2 in the Closed Caption mode. 15. CAP/TEXT Button -Press to switch between normal TV and the two Closed Caption modes (captions or text), when available. Before using the remote control, batteries must first be installed. HOW TO INSTALL BATTERIES 1. Open the battery compartment cover. 2. Install two “AAA” (penlight size) batteries. 3. Replace the battery compartment cover. Use two “AAA” size pen...
Эта инструкция также подходит к моделям:Телевизоры - 20A23 (1.09 mb)