Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
5. Highlight Done and press ENTER. To tune your favorite channels for the current ANT input: Press FAV CH yz. To tune your favorite channels using the favorite channel list: 1. Press 100 to display the favorite channel list. 2. Press the corresponding number button (1-9) to select your desired channel. Note: To tune your favorite channels for another input, you will need to change the Input Selection first. CH 4-1 CH 4-2 CH 9 CH 10 CH 12 CH 17 CH 19 1 2 3 4 5 6 7 8 9 To quickly scan through your favorite channels in a nine picture multi-window (for the current ANT input): Press FAV SCAN. See page 78 for details. Note: • To tune to a channel from the FAV SCAN mode, highlight a window and press ENTER. • To scan your favorite channels for another input, you will need to change the Input Selection first. Channel Numbers 100 y x• z FAV CH yz FAV SCAN 44 44 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. HM95_R1_044-52_061505 44 6/24/05, 9:47 PM Black (E) 46/52/62HM95 Chapter 6: Setting up your TV Setting up and using TheaterNet™ on-screen device control The TheaterNet feature allows you to control many brands of IEEE1394 and/or infrared remote-controlled A/V devices through your TV using on-screen control icons and the TV’s remote control. Note: • Although the TheaterNet on-screen device control feature includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TheaterNet feature to operate your device or some of the features on that device, use the device’s remote control or the controls on the device. • For IR pass-through device control information, see “Controlling infrared remote-controlled devices through the TV (IR pass- through)” on page 21. Setting up TheaterNet All device types except IEEE1394 require the following setup process before you can control them using the TheaterNet on- screen icons. All compatible IEEE1394 devices are automatically recognized by the TheaterNet feature and do not require setup. Note: See page 22 for details about the IEEE1394 ports. If your IEEE1394 device is not recognized through the IEEE1394 port or through the TheaterNet feature, it may be possible to set it up for IR pass-through control as an infrared device (see page 21). To set up TheaterNet device control: 1. Make sure you have properly connected your infrared remote-controlled device(s). See page 21 for details. 2. Press MENU and open the Setup menu. 3. Highlight Installation and press ENTER. (A new set of Installation menu icons will appear on-screen, as shown in step 4). Navigate Select Back ExitCH RTN EXIT Installation Sleep Timer On/Off Timer HDMI 1 Audio Auto Auto 2 Sec 15 min HDMI 2 Audio Slide Show Interval AVHD Skip Time Setup 4. Open the Devices menu, highlight TheaterNet Devices, and then press ENTER. 5. The TheaterNet Setup menu opens. TheaterNet Setup Input Type Brand IR List IR Code Video 1 Cable General Instrum... 0000 Test Reset Done Select device type, brand, and IR code from owners manual. 000 0 Using the x• buttons, select the Input the device is connected to. Note: When the input is changed, all unsaved settings will be lost. 6. Press z and then x• to select the device Type. 7. Press z and then x• to select the device Brand. Note: When selecting a new brand, the IR code will be set to 0. 8. Press z and then x• to select the device’s IR code. 9. If the desired IR code is found, skip to step 10. If the desired IR code is not in the list, press z and use the Channel Number buttons to enter the device IR code. Note: You can find the IR code for your device in the on- screen list or in the TheaterNet device code table on pages 47–49. 10. Highlight Test and press ENTER to test whether the device responds to the code. If the device does not respond to the code, repeat steps 8 and 9 using another code for the same device. When done, highlight Done and press ENTER or choose a different Input for which to set up TheaterNet device control. To remove a device from TheaterNet: 1. Follow steps 1–5 above. 2. Highlight Reset and press ENTER. 3. Highlight Done and press ENTER. IEEE1394 Devices TheaterNet Devices Devices Navigate Select Back ExitCH RTN EXIT Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 45 HM95_R1_044-52_061505 45 6/24/05, 9:47 PM Black (E) 46/52/62HM95 Chapter 6: Setting up your TV Setting up and using TheaterNet™ on-screen device control (continued) Using the TheaterNet control icons 1. Set up your infrared devices in TheaterNet, if you have not already done so (see page 45). Note: IEEE1394 devices do not need to be set up in TheaterNet because they appear automatically in the TheaterNet menu. 2. Press DEVICE on the remote control to display the device control selection screen. DEVICE CTRL y x• z ENTER EXIT 3. Using the yzx • buttons, highlight the device you want to control and press ENTER. TheaterNet Video 2 Video 3 ColorStream HD2ColorStream HD1 Toshiba Toshiba Toshib...