Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - 13A24 (176.76 kb)
Телевизоры - 13A24 (1.07 mb)
Фрагмент инструкции
G: All ages R: Under 17 years old parental PG: Parental guidance guidance suggested PG-13: Parental guidance less NC-17: 17 years old and above than 13 years old X: Adult only NOTES: • V-Chip function is based on specifications for the United States and therefore may not work properly in Canada. • If you want to change your password, follow steps 1 and 2 and select “CHANGE PASSWORD” option. Then enter your new password. • The V-Chip function is activated only on programs and tapes that have the rating signal. • Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the show. When the program starts, the “INPUT PASSWORD” will appear on the screen. When you want to release the V-Chip temporarily, enter the password. If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original setting will be resumed. If you return to the channel you were watching you must re-enter your password to temporarily release your V-Chip function again. • When you watch the TV using a cable box or a VCR and the TV is tuned to channel 3 or 4, you must release the V-Chip temporarily. The V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case. • When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears. • If you forget or lose your password, you can reset it using the following procedure: -While holding down the VOLUME D button on the TV, press “0” on the remote control for a few seconds. 10 3M12701A-E P08-12 10 5/2/04, 10:02 USING THE LOCK MENU The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions. You can use these functions after entering the correct PASSWORD. (This password is the same one selected under “SETTING THE V-CHIP” on page 10.) LOCKING CHANNELS With the CH LOCK feature, you can lock specific channels.You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels. 1 Use the Channel Number Buttons (0–9) to display the television channel you wish to lock. Press MENU, then press SET + or – until the indicator 2 next to “LOCK” begins to flash. Then press ENTER. Use the Channel Number buttons (0–9) to enter your 3 password, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next 4 to “CH LOCK” begins to flash, then press ENTER. Press SET + or – to select: 5 • INPUT to select the channel as one to be locked. Then press ENTER. • ALL CLEAR to clear all channels from the list of locked channels. Then press ENTER. Repeat steps 1 through 5 to lock other channels. When you 6 are finished locking channels, press MENU repeatedly until the menu screen is cleared. If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel. NOTES: • If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password. • After programming CH LOCK, change channels before turning off the television. • If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER. ENGLISH LOCK .+ / – / ENTER / MENU . GAME TIMER CH LOCK VIDEO LOCK CHANGE PASSWORD CH LOCK .+ / – / ENTER / MENU . CABLE INPUT ALL CLEAR --------- --------- --------- LOCKING VIDEO INPUT With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channel 3 and 4. You will not be able to select the input sources with the TV/ VIDEO button or Channel buttons unless you clear the setting. Press MENU, then press SET + or – until the indicator 1 next to “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0–9) to enter your 2 password, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator 3 next to “VIDEO LOCK” begins to flash, then press ENTER. 4 Press SET + or – to select: • OFF: Unlocks all video input sources. VIDEO LOCK .+ / – / ENTER / MENU . OFF VIDEO VIDEO+ • VIDEO: Locks VIDEO. • VIDEO +: Locks VIDEO, channel 3 and channel 4. This option should be used if you use the antenna to play a video tape. Press MENU repeatedly until the menu screen is cleared. 5 NOTE: After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television. TO SET THE ON TIMER SETTING THE GAME TIMER With the GAME TIMER feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, 90, or 120 minutes). Press MENU, then press SET + or – until the indicator next to 1 “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0–9) to enter your pass 2 word, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next to 3 “GAME TIMER” begins to flash, then press ENTER. Press SET + or – to select a time limit 4 (30 minutes, 60 minutes, 90 minutes, 120 . . min...