Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Air 6 Air 11 • This feature doesn’t work when the “V-Chip” or “Caption” is active. • If you turn the TV off while watching and turn it on again, then the mode will return to normal video. • The picture size can’t be changed when the “PIP” is active in the TV or AV mode. 39 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 40 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 40 TV OPERATION Selecting an External Source 3 Press the … or † button to select “Source”, then press the ENTER button. If you have not connected any equipment to the TV’s input jacks, the signal from these inputs will not appear. Press the … or † button to select an external signal, then press the ENTER button. PIP : On vv Source :T vv Swap vv Size : vv Position : vv Air/CATV : vv Channel : 6 vv Move Enter Return PIPT V TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 oe For more information about external signals, see page 67). If you select “TV”, the sub picture is the same as the main picture. oe The sub picture doesn’t support “ANT 2 IN”, “Component1”, “Component2”, “Component3” and “HDMI”. Swapping the Sub picture and Main picture 4 Press the … or † button to select “Swap”, then press the ENTER button. The sub picture appears in the main picture, and vice versa. PIP : On vv Source : TV vv Swap vv Size : vv Position : vv Air/CATV : Air vv Channel : Air 6 vv Move Enter Return PIPT V oe The swapping doesn’t support “ANT 2 IN”, “Component1”, “Component2”, “Component3” and “HDMI”. oe The swapping doesn’t work in the “ ” (4PIP) and “ ” (13PIP) mode. Changing the Size of the Sub picture 5 Press the … or † button to select “Size”, then press the ENTER button. Press the … or † button to select a size you want, then press the ENTER button. PIP : On vv Source : TV vv Swap vv Size : vv Position : vv Air/CATV : vv Channel : 6 vv Move Enter Return PIPT V oe “ ” (Double) function doesn’t operate in the “HDMI” mode. 40 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 41 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 41 TV OPERATION Changing the Location of the Sub picture 6 Press the … or † button to select “Position”, then press the ENTER button. Press the … or † button to select a position you want, then press the ENTER button. PIP : On vv Source : TV vv Swap vv Size : vv Position : vv Air/CATV : vv Channel : 6 vv Move Enter Return PIPT V Selecting a Signal Source for the Sub picture If the source of the sub picture is “TV” during PIP on, you can select a signal source of the sub picture separately from the main picture. (If the main picture is “ANT 2 IN” and the signal sources are different, making adjustments is necessary.) 7 Press the … or † button to select “Air/CATV”, then press the ENTER button. Press the … or † button to select “Air”, “STD”, “HRC” or “IRC”, then press the ENTER button. Move Enter Return PIPT V PIP : On vv Source : TV vv Swap vv Size : vv Position : vv Air/CATV :A vv Channel : 6 vv Air STD HRC IRC 41 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 42 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 42 TV OPERATION Changing the Channel of the Sub picture After you set the signal source (antenna or cable) of sub picture, it is easy to change channels. 8 Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select a channel you want, then press the ENTER button. Press the EXIT button to exit. PIP : On vv Source : TV vv Swap vv Size : vv Position : vv Air/CATV : Air vv Channel : vv Move Enter Return PIPT V Alternate method: Press the CH or CH button to change channels of sub picture during PIP on. oe The channels of sub picture are not available when antenna is set to “ANT 2 IN”. It links to “ANT 1 IN”. Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) Press again to cancel. oe The still function doesn’t operate in “Component 1, 2” mode. 42 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 43 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 43 TV OPERATION Adjusting the Volume Press the VOL + or VOL -buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound by using the MUTE button. 1 Press the MUTE button on the remote control. The message “Mute” is displayed and the sound cuts off. 2 To turn mute off press the MUTE button again or, press either the VOL-or VOL+ button. Mute 43 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 44 BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 44 TV OPERATION Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by making a selection from the menu), or you can select “Custom”, which automatically recalls your personalized sound settings. 2 Press the ENTER button to select “Mode”. Press the … or † button to select a particular item, then press the ENTER button. Press the EXIT button to exit. 1 Press the MENU button. Press the … or † button to select “Sou...