Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
V.MENU MUTE P Select the PICTURE option by pressing the P ^ or Ў buttons the required number of times. Press + or -to select one of the following options: NORMAL for a standard picture SHARP for a crisper picture SOFT for a softer picture 25 VCR MENU RECORD PROGRAMME REPEAT : OFF PICTURE : NORMAL TAPE SELECT : E180/T120 V.SYSTEM : AUTO ADJUST SELECT EXIT When you are satisfied with the setting, press V.MENU ( ) one or more times to return to normal viewing. ype of Cassette Tape If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted. 1 Press V.MENU ( ) to display the VCR menu. 2 Select the TAPE SELECT option by pressing the P ^ or Ў buttons the required number of times. 3 Press + or -to select type of cassette tape. . E180/T120 . E240/T160 . E260/T180 . E300 Rewinding and Fast-forwarding a Cassette P10 2:19:43 SP V.MENU MUTE P You can: . Rewind or fast-forward a cassette without seeing the picture on the television . Search for a given sequence forwards or backwards on the tape To... Then press... Rewind the tape without viewing the picture REW ( ) when the cassette is stopped. Rewind the tape while viewing the picture (Reverse Search function) REW ( ) when the cassette is playing. Switch from reverse searching to playback again REW ( ) while rewinding the tape with the picture displayed. Fast-forward the tape without viewing the picture FF ( ) when the cassette is stopped. Fast-forward the tape while viewing the picture (Forward Search function) FF ( ) when the cassette is playing. Switch from forward searching to playback again FF ( ) while fast-forwarding the tape with the picture displayed. .. When pressing the REW( ) or FF( ) buttons for more than 2 seconds in the “PLAY” or “RPS/FPS (Reverse Picture Search / Forward Picture Search)” modes speed up. Normal speed resumes (“PLAY”) when the REW( ) or FF( ) buttons are released. . The cassette is rewound automatically when the end of the tape is reached. If you press POWER ( ) while a cassette is being rewound, the COMBI VISION switches automatically to Standby mode and the cassette continues rewinding until the beginning of the tape is reached. 26 2 When playing back frame by frame, interference may occur on the screen. Press the TRK or buttons to minimise this effect. 3 To return to normal playback, press PLAY ( ). . When you have been using the Frame-by-Frame function for more than about five minutes, the VCR will automatically play to protect the: . Cassette . Video heads MUTE REC TRK CLEARLANG.SEL EJECT INDEX SLEEPMEMORY P/S CRYSTAL PB P.STD MENU 27 Recording a Programme Directly GB Pre. V.MENU MUTE DISPLAY REC EJECT INDEX SLEEPMEMORY P/S CRYSTAL PB P.STD MENU P P Before recording a programme, you must have stored the corresponding channel. If you have not done so, refer to page 13 or 16 for more details. .. If you have 1 tuner model, you cannot record one programme while watching another. . If you have dual tuner model, you can record one programme while watching another. 1 Select: . The TV station to be recorded using the P ^ or Ў buttons or . The AV source using the INPUT ( ) button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television. 2 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. 3 Hold REC ( ) down for at least two seconds to start recording. Result: The record indicator appears on the screen. An index is recorded on the tape (see page 36). During recording you can also press DISPLAY ( ) to display the number of the programme being recorded and the remaining time on the cassette. 4 To... Then press... Stop recording temporarily (to avoid recording P/S ( ). TV spots or to change channels for example) Start recording again P/S ( ) or REC ( ). Stop recording completely STOP ( ) once. . If the VCR is left in Pause mode for more than ten minutes, recording will be stopped automatically to protect the heads and the cassette. . If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. If you reach the end of the tape while recording, the cassette rewinds automatically. 28 P10 0:00:00 P02 SP OTR 0:30 INPUT DISPLAY REC EJECT INDEX SLEEPMEMORY P/S CRYSTAL PB P.STD MENU P P10 0:00:00 P02 SP OTR 0:30 INPUT DISPLAY REC EJECT INDEX SLEEPMEMORY P/S CRYSTAL PB P.STD MENU P DISPLAY REC EJECT INDEX SLEEPMEMORY P/S CRYSTAL PB P.STD MENU P 29 TM Feature (depending on the model) Before presetting your VCR unit: . Check that the language, date and time are correct (if the clock has not been set, the Date/Time Setting function is activated automatically) . Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. 1 Press the VIDEOPLUS button. Result: A message is displayed to...
Эта инструкция также подходит к моделям:Телевизоры - Colour TV/VCR (1.44 mb)