Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
INPUT SOURCE SELECTION . MENU DISPLAY O VOLUME INCREASE . VOLUME DECREASE ” NEXT CHANNEL ’ PREVIOUS CHANNEL 29Z4/34Z4 29Z6/32Z6/34Z6 . Using the Buttons on the Panel If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to: Switch on the TV when it is in Standby mode and select channels ( CH ) Access the menu ( MENU ) Adjust the volume ( + VOL -) Switch among Video input modes ( TV/VIDEO ) 5 6 View of Connection Panel ENG AUDIO INPUT (R, L) VIDEO INPUT S-VIDEO INPUT HEADPHONE CONNECTOR AUDIO/VIDEO MONITOR OUTPUT SUB-WOOFER SPEAKER OUTPUT (29Z7/32Z7/34Z7) 75. COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK AUDIO/VIDEO INPUT 2 COMPONENT INPUT 1 Side of the TV ANT IN Rear of the TV . Available format for Component Inputs; 480i/480p/1080i-60Hz AUDIO/VIDEO INPUT 1 AUDIO/VIDEO INPUT 3 COMPONENT INPUT 2 Infrared Remote Control AUTOMATIC SWITCH-OFF/ TELETEXT STORE VCR OR DVD FUNCTIONS; -STOP -REWIND -PLAY/PAUSE -FAST FORWARD TELEVISION STAND-BY DIRECT CHANNEL SELECTION ONE/TWO-DIGIT CHANNEL SELECTION/ TELETEXT PAGE HOLD TUNER OR CABLE NETWORK SELECTION NEXT CHANNEL/ TELETEXT NEXT PAGE VOLUME DECREASE TEMPORARY SOUND SWITCH-OFF TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST PICTURE SIZE/ TELETEXT SIZE SELECTION TURBO SOUND SOUND MENU DISPLAY (EQUALIZER) STILL PICTURE PIP FUNCTIONS (OPTION); -PIP ON/OFF -INTERCHANGE THE MAIN AND SUB PICTURE (SWAP) -STILL -SIZE SELECTION (SIZE) -LOCATION SELECTION (LOCATE) -SCAN -SOURCE SELECTION (TV/VIDEO) -CHANNEL SELECTION (P/) MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE, DVD PLAYER. . The remote control might not be compatible with the TV manufactured by another company. ON-SCREEN DISPLAY/ TELETEXT REVEAL EXTERNAL INPUT SELECTION/ TELETEXT MODE SELECTION (LIST/FLOF) MENU DISPLAY/ PROGRAMME SELECTION BY NAME VOLUME INCREASE PREVIOUS CHANNEL\ TELETEXT PREVIOUS PAGE SOUND MODE SELECTION/ TELETEXT SUB-PAGE PICTURE MENU DISPLAY PICTURE EFFECT SELECTION SOUND EFFECT SELECTION FASTEXT TOPIC SELECTION ENG . The performance of the remote control may be affected by bright light. 7 Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: . Purchase the television . Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: -on the battery against -on the remote control + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. 8 Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial A cable television network A satellite network In the first three cases, connect the aerial or network input cable to the 75. coaxial socket on the rear of the television. If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to: “Storing Channels Automatically ” on page 14 “Storing Channels Manually” on page 16 ENG Rear of the TV Cable Television Network or 9 Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. . The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “”button (On/Off) on the front of the television. Result: The Standby indicator on the front of the television lights up. 3 Press the POWER ( ) button on the remote control to switch the television on. Result: The programme that you were watching last is re- selected automatically. . If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically”on page 14 or “Storing Channels Manually”on page 16. 4 To switch your television off, press the “”button (On/Off) again. ur Television in Standby Mode Your television can be placed in Standby mode, in order to reduce: Power consumption Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( ) button on the remote control. Result: The screen is turned off and the Standby indicator on the front of the television lights up in red. 2 To switch the television back on, simply press the POWER () button again. . Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial. 10 Becoming Familiar with the Remote Control The remote ...
Эта инструкция также подходит к моделям:Телевизоры - 34Z7 (1.24 mb)
Телевизоры - 34Z6 (1.24 mb)
Телевизоры - 32Z7 (1.24 mb)
Телевизоры - 32Z6 (1.24 mb)