Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Note: The Component3 jack is available on HCN436W / HCN473W / HCN553W / HCN653W. Press the Menu button to exit. Demo Mode Melody On/Off ExitEqualizer Demo Mode Demo Mode Color Tone : Nomal Demo Mode Infor Catcher Exit Exit 4.19 CHAPTER FOUR:SPECIAL FEATURES SPECIAL FEATURES Customizing Your Remote Control Your TV comes equipped with a “universal” remote control. In addition to controlling the TV, the universal remote can also operate most VCRs, DVDs and cable boxes (even if your VCR, cable box or DVD are made by manufacturers other than Samsung). Setting Up Your Remote Control to Operate Your VCR (or DVD) 1 Turn off your VCR (or DVD.) The remote control has four 2 “modes”: “TV,” “VCR”, “Cable” Press the MODE button and make sure that the VCR (or DVD) LED and “DVD.” Press the “MODE” is illuminated. button to switch the remote control to the “VCR” (or DVD) mode. 3 On your Samsung remote control, press Set. Make sure you enter 3 digits of 4 the code, even if the first digit is a Enter 3 digits of the VCR (or DVD) code listed on page 4.22 for “0.” your brand of VCR (or DVD). If more than one code listed, try the first one. If your VCR (or DVD) does 5 not turn on, repeat steps 2, 3, and Press the Power button on the remote control. Your VCR 4, but try one of the other codes (or DVD) should turn on. If your VCR (or DVD) turns on, your listed for the brand of your particremote control is now set correctly. ular VCR (or DVD). If no other codes are listed, try each code, 000 through 089. When your remote control is 6 in the “VCR” (or DVD) mode, the Once your remote control is set up, press the MODE button volume buttons still control your any time you want to use the remote to operate your VCR (or TV’s volume. DVD). When your remote is in the “TV” mode, the VCR control buttons (PLAY, PAUSE, etc.) will still operate your VCR. CHAPTER FOUR:SPECIAL FEATURES 4.20 SPECIAL FEATURES Setting Up Your Remote Control to Operate Your Cable Box 1 Turn off your cable box. The remote control has four 2 “modes”: “TV,” “VCR,” “CABLE” Press the MODE button and make sure that the Cable and “DVD.” LED is illuminated. Press the “MODE” button to switch the remote control to the “Cable” mode. 3 On your Samsung remote control, press SET. Make sure you enter 3 digits of 4 the code, even if the first digit is a Enter 3 digits of the cable box code listed below for your brand of “0.” (If more than one code listed, cable box. try the first one.) If your cable box does not turn 5 on, repeat steps 2, 3, and 4, but try Press Power. Your cable box should turn on. If your cable box turns one of the other codes listed for your on, your remote control is now “set up” correctly. particular brand of cable box. (If no other codes are listed, try each cable box code, 000 through 077.) When your remote control is 6 in the “CABLE” mode, the volume Once your remote control is set up, press the MODE button any time buttons still control your TV’s vol you want to use the remote to operate your cable box. ume. Also, the VCR control buttons (PLAY, PAUSE, etc.) will still operate your VCR. 4.21 CHAPTER FOUR:SPECIAL FEATURES CHAPTER FOUR: SPECIAL FEATURES 4.22 SPECIAL FEATURES Cable Box Codes VCR Codes DVD Codes Note: The remote control might not be compatible with all DVD Players, VCRs, and Cable boxes. Chapter Five TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Problem Possible Solution Poor picture. Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the TV/Video button. Make sure the TV is plugged in. Check the antenna connections. No color, wrong colors or tints. Make sure the program is broadcast in color. Adjust the picture settings. Picture rolls vertically. Adjust the antenna. Check all wire connections. The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again. Your remote control does not operate your TV. Press the “MODE” button to put your remote control in the “TV” mode. The TV won’t turn on. Make sure the wall outlet is working. Note Wide TV(16:9) : If you watch a still image or the screen in the Normal(4:3) aspect ratio format for a long time, images may be burned onto the screen. Normal TV(4:3) : If you watch a still image or the screen in the Wide(16:9) aspect ratio format for a long time, images may be burned onto the screen. 5.1 CHAPTER FIVE: TROUBLESHOOTING APPENDIX Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV. Placement • Do not place the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleane...