Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
(The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost. SLEEP 10 To cancel the sleep timer: Press the SLEEP button repeated- ly until "SLEEP 0" is displayed. You may view specially labeled (cc) TV pro-1) Press the MENU button so that the menu GAME MODE Set to the most suitable position for TV GAME. [+] : ON [-] : OFF BRIGHT Adjust until the darkest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone Notes: . “+” is achieved by pressing the VOL(ume) ^ button and “-” by pressing the VOL(ume) Ў button. . In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ^ button so that "PIC- TURE" is selected. Then, press the CH(annel) ^ or Ў button repeatedly until the display returns to the screen. . If you adjust any picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. [USING THE GAME BUTTON] You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen. . To exit the Game mode and external input mode, press the GAME button on the remote control again. . To cancel the Game mode only, adjust the picture control. In this case, “VIDEO” instead of “GAME” appears on the TV screen. . If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode auto- matically. : Press the CH(annel) ^ or Ў button. LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the proce- dure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) ^ or Ў button to point to "[ENGLISH]". 5) Select "ENGLISH" or "ESPANOL" = Spanish by using the VOL(ume) ^ or Ў button. 6) Press the MENU button to exit the menu. CHANNEL PRESETTING NOTE:You MUST PRESET channels BEFORE using CHANNEL ^ or Ў button. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV screen. 3) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then, press the VOL(ume) ^ button. 4) Press the CH(annel) ^ or Ў button to point to "AUTO MEMO". Then, press the VOL(ume) ^ button. The tuner scans and memorizes all active channels in your area. . The TV distinguishes between standard TV channels and cable (CATV) channels. . When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. . When you press the CH(annel) ^ or Ў button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. . The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then, press the VOL(ume) ^ button. 3) Press the VOL(ume) ^ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ^ or Ў button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. STEREO SOUND SYSTEM This function suppresses noise, restores the dynamic range and electronically expends the stereo signal to create a more specious sound effect. 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then, press the VOL(ume) ^ button. 3) Press the CH(annel) ^ or Ў button so that "STEREO" is selected. 4) Press the VOL(ume) ^ or Ў button to select the stereo mode on or off. Stereo sound is effective when "STEREO" is on. RESUME FUNCTION If the power ...