Войти:
Оценок - 4, средний балл: 4.5 ( )

Инструкция по эксплуатации Symphonic, модель MGTD204

Производитель: Symphonic
Размер: 2.2 mb
Название файла: d8d2815d-dda1-4c92-83e8-b686061b53a2.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWDor REW^^ button during playback. (in the SP / LP / SLP modes) NOTE: • If you press the F.FWD^B or REW^^ button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP / EJECT button once to stop it, twice to eject it. 2)Press it again and the TV/VCR/DVD will now search in super high speed. (in the LP / SLP modes only) NOTE: • Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed. TIME SEARCH TV/VCR The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: • Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. • This function is not operative when a cassette tape is not inserted in the TV/VCR/DVD. In the example below: To watch a program before/ after 2 hour 50 minutes from the present position, in either direction. 1 Insert a tape 2 Select “TIME SEARCH” mode Press the SETUP button on the remote control. Press the Arrow button K or L to point to “TIME SEARCH”. Then press the ENTER button. 3 Enter your desired time Press the Arrow button K or L until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes) If you wish to cancel the Time Search at this point, press the SETUP button on the remote control. 4 Begin Time Search By pressing the Arrow button S or B, the TV/VCR/DVD will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/VCR/DVD or the STOP button on the remote control. This will delete the selected time. - TV/VCR SETUP -TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] B ZERO RETURN TIME SEARCH INDEX SEARCH - TV/VCR SETUP -TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN B TIME SEARCH INDEX SEARCH - 28 - EN 1C29 INDEX SEARCH TV/VCR This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the RECORD button is pressed. It will also be marked at the starting point of Timer recording and OTR. • The index mark will not be recorded if the PAUSE button is pressed and released during recording. • The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording. • In some cases, the index mark at the beginning of video tape cannot be detected. Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs. 1 Select “INDEX SEARCH” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “INDEX SEARCH”. Then press the ENTER button. - TV/VCR SETUP -TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH B INDEX SEARCH 2 Enter your desired number Press the Arrow button K or L until the number of programs that you want to skip appears. (Example: “03” for 3 programs) • The Index Search mode will be INDEX SEARCH "/l" canceled if the procedures are not activated in 30 seconds. 3 Begin Index Search Press the Arrow button S or B. The TV/VCR/DVD begins rewinding or fast forwarding to the beginning of desired program. NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one. 4 After Index Search When the preset program is reached, the TV/VCR/DVD will start playback automatically. • A video cassette must be inserted in the TV/VCR/DVD for this function to work. • The number of Index Searches can be set up to 20. • This function will not operate in the recording mode. • When you want to cancel the Index Search while in progress, press the STOP button. SPECIAL FEATURES REAL TIME TAPE COUNTER TV/VCR This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The “-” indication will appear when the tape has rewound further than “0:00:00” on the tape counter. AUTO REWIND-EJECT TV/VCR • When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR/DVD will eject the tape and t...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории