Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Certain Cable TV Systems offset some channels to reduce interference. It will be necessary to use the cable company supplied converter to receive these specific channels. 1. Press (tend). 2. Press A or W and ^ or ^ to highlight the Set Up Icon. 3. Press I to display the Set Up Menu. -32- 4. 5. 6. Press A or W to highlight MODE. Press ^2 or to select TV or CABLE. Press (EE5 twice to exit menus. Set Up Features Auto Programming - The Auto Programming feature allows you to place all channels with a video signal into Channel Scan Memory. When you press ^ or only those channels with a video signal will be accessed. NOTE: TV or Cable Tuning mode must beset properly for your system. 1. 2. Press (Sy). A or W and or B^ to Manual Programming - This feature allows you to select which channels are placed into Channel Scan Memory so when you press ^ or ^ only those channels you desire will be accessed. 1. Press the [IggUj . 2. Press A or Wand «il orB5 to highlight the Set Up Icon. Press Icon. or V and or O' to highlight the Set Up 3 press (HHD to display the Set Up Menu. 3. Press iteJJ to display the Set Up Menu. 4. Press A or W to highlight AUTO PROGRAM. 5. Press or B^ to start Auto Programming Scan. Channels will automatically advance until all channels have been scanned. • Channel numbers with video signal present will turn blue which indicates stored in Channel Scan Memory. 6. Press Clsaj) twice to exit menus. NOTE: Some channels with very weak signals may be locked into memory. These must be deleted manually using the Manual Program feature. Helpful Hints: After Auto Programming: Blue channel number indicates channel is in Channel Scan Memory. All channels are available by direct access using the Keypad numbers “0 through 9". After Auto Programming Scan has completed, up to 15 channels will be programmed into the FAVORITE Channel Scan if space is available. Any original channels that were programmed into FAV CHANNEL will remain. (Refer to Favorite Channel Scan for deleting unwanted channels.) leal 4. Press A or W to highlight MANUAL PROGRAM. 5. Press ^ or B^ to display Manual Programming Menu. 6. Use the Remote Control Keypad numbers “0 through 9” or A or W to select channels. 7. Press B^ to add channel(s) to memory (blue). Press the ^ to delete channel(s) from memory (yellow). 8. Repeat Steps 6 and 7 to continue adding or deleting channels. 9. Press (G33) twice to exit menus. -33- Set Up Features AlltO Power On - Automatically turns the television on when a VCR, Cable Box, etc., are powered. The Television needs to be plugged into the switched outlet of the device. Setting the Auto Power On feature will cancel the time and timer control settings. The Main Menu Icon for the TIMER CONTROL will be replaced with an EXIT Icon. 1. Press Ltepgj). 2. Press A or ^ and or B^ to highlight the Set Up Icon. 3. Press (U2SJJ to display the Set Up Menu. 4. Press A or to highlight AUTO POWER ON. 5. Press ^ or ^ to select SET. 6. Press (G33) twice to exit menus. CC On Mute - Activates the On Screen Closed Caption feature when the^S^ on the Remote Control is pressed. To deactivate press CElD again. NOTE: This feature only functions when the Close Caption Mode is in the “OFF” position. The program being viewed must be broadcast with Closed Caption. (Refer to your local TV guide.) 1. PressiHs). 2. Press A or WandЭта инструкция также подходит к моделям:
Телевизоры - CT27SF34V (1.8 mb)