Оценок - , средний балл:
(
)
)
Производитель: Jensen
Размер: 444.29 kb
Название файла: be195c91-b571-44ca-abec-96da286fecbd.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Options: Air /Cable. Air/Cable Auto Scan Show/Hide Favorite Channel No Channel Label DTV Signal e * 2. Auto Scan: When selected, will automatically seek out all available channels in your viewing area. Make sure the antenna is fully extended or you are using the external magnetic base antenna prior to scanning for channels. (i) From the remote, press the v button to scroll down to Auto Scan. (ii) Press the ENTER button on the remote to start the scan (iii) Once the scan is complete, the TV will automatically start playing the lowest channel found. (iv) You can now use the A and v buttons on the remote or the CH+ ±/CH- ▼ buttons on the TV to change the channels. Show/Hide Allows you to edit the channels you want shown on the TV once the scan is completed. (i) From the remote, press the v to scroll down to Show/Hide (ii) Press AUTO/OK on the TV or ENTER on the remote to enter. (iii) A list of all the channels found will display and a “V” will appear next to the channel if it will show up when changing channels during normal operation. JDTV-750 User Manual, page 12 (iv) Press the v button on the remote to scroll down through the channels. (v) Press the MENU on the TV or EXIT on the remote three times to return to normal viewing. 4. Favorite (i) Press A and v buttons on the remote to select. (ii) Press AUTO/OK on the TV or ENTER on the remote to set your favorite channel. You can edit more than one program as favorite program by this option. Once a program is chosen, a “V” will appear next to the channel. 5. Channel No. Displays the current channel you are currently viewing. 6. Channel Label Displays the call letters of the TV station you are currently viewing. (i) You can edit the channel label by pressing the OK or ENTER button. (ii) Use the A / v and < / > buttons on the remote to edit the name you want displayed for the channel. (iii) Press the AUTO/OK on the TV or ENTER on the remote when completed. 7. DTV Signal Displays the signal strength or the TV station you are currently viewing. TV OPERATION SELECT A PROGRAM CHANNEL 1. Press CH + button to play next channel. 2. Press CH - button to play previous channel. 3. Press numeric buttons on the remote control allow direct access to the channel you want to watch. Example: Channel 9, press "9" and three seconds later, it will automatically switch to channel 9. You can also press the “9” followed by the ENTER button to avoid the three second delay and get instant access to the channel. Channel 12, press "1" and "2" and three seconds later, it will automatically switch to channel 12. You can also press the "1" and "2" followed by the ENTER button to avoid the three second delay and get instant access to the channel. Note: If one frequency spot has more than one channel, for example, you want select