Войти:
Оценок - 5, средний балл: 4.2 ( )

Инструкция по эксплуатации Memorex, модель MT1190C

Производитель: Memorex
Размер: 114.99 kb
Название файла: c30b1509-1b35-2344-3d39-d71e19a24c8b.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Press MENU to display main menu. 2. Select (+) or (-) until V-BLOCK SET, press MENU. 3. Use the number buttons to input “0000”. (the preset pass number is 0000), then press MENU. 4. Press MENU, the OFF (or ON) beside V-BLOCK will flash. 5. Select (+) or (-) until ON, press MENU. 6. Select (+) or (-) until EXIT, press MENU to exit. To disable block, set V-BLOCK to OFF. If you turn the TV on for the first time, setting V-BLOCK to ON alone will not enable the block unless you change the preset state for MPAA and TV Rating from OFF to any rating. In case you forget the pass number call your nearest Service Centre for assistance. MPAA RATING SET UP 1. Go to V-BLOCK SET menu screen. 2. Select (+) or (-) until CHANGE RATING, press MENU. 3. While MPAA RATING is highlighted, press MENU, the OFF (or any rating) beside MPAA RATING will flash. 4. Select (+) or (-) until the desired rating, press MENU. 5. Select (+) or (-) until EXIT, press MENU to exit. Rating rotates from lower to higher. X is the highest rating. All programs with a higher rating than the one selected will also be blocked. If you don’t want to block MPAA RATING, set it to OFF. V-BLOCK is activated only on programs and tapes that have the rating signal and if activated “V-BLOCK” message together with the rating level appears on-screen. The channel blocking will cease if the input source or if the channel is changed. TV RATING SET UP 1. Go to CHANGE RATING sub-menu screen. 2. Select (+) or (-) until TV RATING, press MENU. 3. Select (+) or (-) until the desired rating appears beside TV RATING, press MENU. When user select TV-Y7, TV-PG, TV-14 or TV-MA and press MENU, the sub-ratings (content-based rating) will appear beside the selected main rating. User can select either only main rating or combine with the sub-ratings as below: TV-Y7(FV), TV-PG(DLSV), TV-14(DSLV), TV-MA(LSV) FV : Fantasy Violence D : Suggestive Dialogue L : Adult Language S : Sexual Situation V : Violence 4. In case of sub-rating selection: While the sub-rating is flashing, press (+) or (-) repeatedly to add or delete the sub-ratings (yellow blank Indicate delete) then press MENU after each entry. 5. Select (+) or (-) until EXIT, press MENU to exit. Rating rotates from lower to higher. TV-MA is the highest rating. All programs with a higher rating than the one selected will automatically be blocked. If you don’t want to block TV RATING, set it OFF. When user select only main rating without any sub-rating then program will be blocked only for main rating, ignoring the sub-rating. But if user select in combination then programs with higher rating plus similar subrating than the one selected will automatically be blocked. CHANGING A PASS NUMBER 1. Go to V-BLOCK SET menu screen. 2. Select (+) or (-) until CHANGE NUMBER, press MENU, the numbers beside it will flash. 3. Input the desire numbers using the Number button, press MENU. 4. Press MENU to re-conform your entry then select exit. To make correction press (+) or (-) and repeat from step 2. 5. Select (+) or (-) until EXIT, press MENU to exit. CLOSED CAPTION MODE Close caption mode allows user to read the words of a broadcast on-screen while hearing them. There are two types of closed captioning: • Captions - Dialogue and description of the action appear in a box at the bottom of the screen. • Text - Words appear on the screen. This is often used for channel guides. Often, both modes are accessible in more than one languages. Close caption is available only on programs with closed captioning. 1. Press TV/CAP(tion)/Text button until CAPTION or TEXT (whichever you want) appears on-screen bottom right corner. 2. Press CH1/CH2 button to select English (CH1) or foreign languages (CH2) caption or text. CABLE TV OPERATION 1. Press MENU. 2. Use (+) or (-) until CH PROGRAM, press MENU. 3. Press MENU until CABLE appears beside AIR/CABLE. (In CATV mode, the channel number changes color from yellow to green.) On CATV (Cable Television) system, programs are brought into the home on VHF CH 2~13, midband CH A~I, super band CH J~W, hyper band CH AA~CCC, ultra band CH W+30~W+84 and sub mid-band CH 5A, A5~A1. CH Number Corresponding CH Number Corresponding on TV CATV CH on TV CATV CH 1 5A 66 W+30 2 2 67 W+31 v v 68 W+32 13 13 v v 14 A 94 W+58 15 B 95 A5 v v 96 A4 35 V 97 A3 36 W 98 A2 37 AA,W+1 99 A1 38 BB,W+2 100 W+59 v v 101 W+60 62 ZZ,W+26 102 W+61 63 AAA,W+27 v v 64 BBB, W+28 125 W+84 65 CCC,W+29 The actual number of channels received depends upon channel reception in your area or your cable system. Consult your local Cable TV company to find out which of these channels are receivable and which type of Cable system is used in your area. Weekly Timer 1. Repeat steps 1 and 2 of One Day Time. 2. Select (+) or (-) until WEEKLY, press MENU and the OFF (or ON) beside WEEKLY will flash. 3. Select (+) or (-) until ON, press MENU to enter the weekly timer screen. 4. Repeat steps 5 and 6 of One Day Timer. 5. Press MENU to select the day(s) of the week you do not...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории