Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
This Class B digital apparatus complies with Canadian ICES-003. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2010 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 4 EN 2 Your SDV6122T Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. Overview English 12V DC 100mA OUTPUT 1 VHF antenna 2 UHF antenna 3 Power switch with LED indicator 4 Gain control knob 5 12V DC power connection 6 Coaxial cable (for TV connection) 7 120V AC/12V DC power adaptor (included) EN 5 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect one end of your coaxial cable to the signal output of the antenna. 2 Connect the other end to the input on the TV receiver. 3 Connect the DC plug to the antenna and the power supply to a 120V AC outlet. 12V DC 100mA OUTPUT 4 Set up SDV6122T For VHF/FM reception 1 Extend the telescopic dipoles to the longest possible length. 2 To turn the amplifier up, rotate the gain control knob towards the max position. 6 EN 3Turn the TV or FM radio to the desired channel/station. Move the dipoles in different directions up and down until the reception is achieved. Note • It is possible to turn the gain control knob down for best reception. For UHF reception 1 Turn the TV to the desired channel/ station. 2 To turn the amplifier up, rotate the gain control knob towards the max position. 3 Tilt or swivel the UHF antenna towards the transmitter until the reception is achieved. Note • It is possible to turn the gain control knob down for best reception. Note • To check the distance from the local TV broadcast transmitters to your location, visit org for more information. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically. • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then reconnect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. EN 7 English 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with ATSC broadcasts? Yes, this antenna is designed to receive ATSC and HDTV broadcasts in the UHF & VHF bandwidths. Can the antenna be powered by a DC power supply in a boat, RV or camper? Yes, there is a DC power socket located at the back of the antenna. Plug your cable/adapter into the antenna and then into your power source. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Note • For best reception, place the antenna away from the metal surface to avoid interference. How do I know how much gain (amplification) is required to receive a clear picture? Once you have the VHF dipoles extended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifi...