Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2010 Koninklijke Philips Electronics N.V.All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. EN 5 2 Your SDV1225T/27 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. Overview 1 VHF antenna 2 UHF antenna 3 Out to TV connection 4 Supporting plate 6 EN 2 To make the antenna stand straight, open 3 Get started the supporting plate at the back of the English To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect the coaxial cable to the TV. antenna (the maximum angle of opening is 120 degrees). TVANT. EN 7 4 Set upSDV1225T/27 For VHF reception 1 Extend the telescopic dipoles to the longest possible length. 2 Turn the TV to the desired channel. Move the dipoles in different directions up and down until the reception is achieved. For UHF reception 1 Turn the TV to the desired channel. Point the UHF reflector towards the transmitter until reception is achieved. -or- Tip • For best reception, point the antenna in the direction of the transmitter. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then reconnect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 8 EN 5 Frequently asked questions Can this antenna work with Analog transmissions? Yes, this antenna can receive analog television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with HD-ATSC broadcasts? Yes, this antenna is designed to receive digital ATSC and HDTV broadcasts in the UHF & VHF bandwidths. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Tip • For best reception, place the antenna away from the metal surface to avoid interference. Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner (see the section on “Set up a digital tuner with this antenna”). 6 Warranty and service Warranty information can be found at: philips.com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips.com English EN 9 7 Glossary V A Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal. C Coaxial A single copper conductor, surrounded with a layer of insulation, covered by a surrounding copper shield and finally, an insulating jacket. An unbalanced transmission line with constant impedance. In audio, this type is commonly used for low level, line signals terminated in RCA connectors. D DVB (Digital Video Broadcasting) DVB is a suite of internationally accepted open standards for digital television. H HDTV (High-Definition Television) It is a digital television broadcasting system with higher resolution than traditional television systems (standard-definition TV, or SDTV). HDTV is digitally broadcast; the earliest implementations used analog broadcasting, but today digital television (DTV) signals are used, requiring less bandwidth due to digital video compression. U UHF (Ultra high frequency) In radio or TV broadcasting: it is the frequency range of electromagnetic waves which lies between 300 MHz and 3 GHz (3000 MHz). 10 EN VHF (Very high frequency) In radio or TV broadcasting: it is the frequency range of electromagnetic waves which lies between 30 MHz and 300 MHz. © 2010 Koninklijke Philips Electronics N.V. DFU_SDV1225T_27_...