Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
This code (up to 9 digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with thfil CLEAR El Ihuttnn. 0 If you want to repeat programming at daily or weekly intervals, select the required settings in the 'DAILY/WEEKLY' line. 'Daily' programming can only be used for recordings to be made from Mondays to Fridays inclusive. O After confirming the corresponding data appears on the TV screen. Note: If you use VIDEOPIus+ for the first time, the 'PROGRAMME NR.' line appears when you enterthe VIDEOPIus+ code. Enterthe required programme number. ' ' DATE DW PR START END K 01 01 17:15 18:45 * * « » 0 ■9 OK 0 Confirm with the I 0K I button. The data has been stored in a TIMER block. Please ensure that you loaded a cassette without erase protection. 0 Press thfl fSTANDBYOl hnttnn Howto enter, check or clear a TIMER-block manually O Press the QMMM] button. 0 Select a free TIMER block or the TIMER block you want to check or clear. 0 Clfiar; Prsss thfi I CLEARED Ihnttnn 0 Enter/Check: Press the Hor E button to switch between 'DATE' (date), 'DW' (daily, weekly), 'PR' (programme number), 'START' (start time) and 'END' (end time). Press the I____A_land the C^O or the IZmH buttons to change the data. 0 To end programming, press the I MENU I button. 0 Press the I standby6] button. Selecting a TV channel_ Select the required TV channel (= programme number) with the I p+/~ I button or the I 0-9 I buttons on the remote control. The selected programme number (e.g.: 'POT) appears in the upper right corner of the TV screen. Volume control_ You can control the volume level with the I I button. _ If you want to mute the sound temporarily (e.g.: during a telephone call), press the I mute# ~1 button on the remote control. When you press it again, the sound returns at the same volume level. Picture control_ You can control brightness, contrast, sharpness and colour here. O Press thfi f MENU I hnttnn. 0 Select and confirm the line 'PICTURE'. 0 Select and confirm the TV screen setting. * In addition, you can adjust the tint for the playback of cassettes in the NTSC standard. OPERATING INSTRUCTIONS PHILIPS 14PV182/05 Congratulations on the purchase of one of the most sophisticated and simple-to-use television/video recorders combinations (TV combi) on the market. With this TV combi you can record and play VHS-standard cassettes. PAL SECAM Please take the time to read this operating manual before using your TV combi. Safety instructions and other notes • Danger: high voltage! Do not open the set. The set does not contain any components that can be repaired by the customer. When the appliance is connected to the power supply there are some components that are constantly operational. To switch off the set completely you must disconnect it from the power supply. Note that this power pack is designed for a power supply of 220-240V/50Hz. Ensure that air can circulate freely through the ventilation slots on the set. • Ensure that no objects or liquids enter the set. If liquid is spilt into it, disconnect the set immediately from the power supply and call the After-sales Service for advice. • The set should not be used immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. After unpacking the set, it should be allowed to acclimatize for at least three hours before installation. • These operating instructions have been printed on nonpolluting paper. Deposit old batteries at the relevant collection points. • Please make use of the facilities available in your country for disposing of the packaging of the set in a way that helps to protect the environment. This electronic equipment contains many materials that can be recycled. Please inquire about the possibilities for recycling your old set. VIDEOPIus+ and PlusCode are trademarks of Gemstar Development Corpoation. The VIDEOPIus+ system is manufactured under licence from Gemstar Development Corporation. Contents Page 1. INSTALLATION.................................2 Connecting additional equipment..................3 Emergency interrupt ............................ 3 User guide ....................................3 Making standard settings ........................3 Setting the clock and date .......................3 2. PLAY BACK....................................5 Continuous playback............................5 3. RECORD.......................................6 Programming with 'VIDEOPIus+'...................7 4. SPECIAL FEATURES.............................8 On Screen Display (OSD).........................8 Sleep function (switch off) .......................8 Switch set on function...........................8 Child lock .....................................9 Before you call an engineer ......................9 VIDEO{PÛ&f- 1 1. INSTALLATION Important for the United Kingdom Connecting the cables This...