Войти:
Оценок - 4, средний балл: 4.8 ( )

Инструкция по эксплуатации Eiki, модель EIP-25

Производитель: Eiki
Размер: 817.25 kb
Название файла: eiki-eip-25-manual.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Features ···························································································2 3. Operation notice···········································································3 4. Projector figure·············································································4 4.1 Function list of control panel 4 5. Accessories····················································································7 5.1 Remote control 8 5.2 Function list of remote control panel 9 6. Operation guide·········································································· 11 6.1 Connecting component 11 6.2 How to connect the projector to your computer 12 6.3 How to connect the projector to a DVD or VCR 12 6.4 Turning on the projector 13 6.5 Basic Image Adjustment 13 6.6 Turning off the projector 14 6.7 Adjusting the projected image height 14 6.8 Adjusting the image focus and zoom 15 7. OSD menu·····················································································16 7.1 Image (Computer mode) 16 7.2 Image (Video mode) 17 7.3 Display (Computer mode) 18 7.4 Display (Video mode) 20 7.5 Audio 21 7.6 Projection setting 22 7.7 Language 23 8. Maintenance and service························································24 8.1 Replacing the lamp module 24 8.2 Cleaning the projector lens 24 9. Appendix························································································26 9.1 Common problems and solutions 26 9.2 Distance ratio of screen and projector 28 9.3 Specifications 29 1 3.Operation notice: Please read and follow the following safety instructions and description carefully. Inappropriate operation method may result in fire, electrical shock, and personal injury or shorten the life span of projector. Warning: Do not cover the lens while the lamp lights up. Warning: To protect your eyes, do not look directly into the projector’s light source. Warning: Make sure that you provide adequate ventilation for the projector. Do not block the ventilation holes in the case Warning: To prevent electrical shock, never open the projector case. Warning: Before using, please make sure that the power cord is connected to an AC receptacle with a protective safety ground terminal. Do not neglect the receptacle with protective safety ground terminal. Warning: To replace the lamp, turn the projector off and unplug the power cord. To avoid burns, wait 1 hr before opening the lamp door. For relevant operation procedures, please refer to page 24 the section of “changing lamp”. Warning: Please use the power cord provided. And use the receptacle with a protective safety ground terminal. Warning: Do not block ventilation openings to avoid danger. Warning: Do not place any drinks on top of your projector. Spilled liquids may damage the projector. Warning: Do not place the projector on a hot surface, moisture or in direct sunlight. Warning: Handle carefully during transportation. Avoid dropping it. 3 4.Projector figure Zoom ring Infrared remote sensor Control panel Lens Cap Focus ring 4.1 Function list of control panel: ^v<> LAMP LED TEMP LED POWER LED POWER MENU SOURCE AUTO/ENTER 4 Power LED (Indicator light) • When the projector is on, Power LED will blink. Press “Power” button to enter screen, Power LED remains lit continually. Temp LED (Indicator light) • When fan malfunctions, the screen will shows the message stating “fan error, system is forced to turn off!”. Temp LED remains lit continually. • When the temperature is unusual, screen will shows the message stating “temperature error, system is forced to turn off!”. Temp LED blinks once every half of second. Lamp LED (Indicator light) • Lamp LED will turn on automatically when lamp is on. Lamp LED will turn off automatically when the lamp is off.. (On/Standby) Power • Press to turn power off and on. • Please refer to the “Starting and turning off the projector” section in Page 13. Menu (OSD menu) • Press this button to display the menu, press once again to close the menu. • If no other action is taken after the menu is opened, it will disappear automatically after 20 sec. Source (Signal source) • Select the signal of Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video, S-Video and Component Video in proper order, and automatically adjust the phase and frequency. Auto/Enter (confirm/Sync) • When using menu, this button is the Enter function. • Under general condition, this button is the Sync function. 5 .... (Up and down button) • OSD active: Press to move between menu options. • OSD inactive: Press to select the video input source. ....(Left and right button) • When using these buttons, press ”Auto/Enter” button then press right key to add setting value; on the contrary, left button to reduce the setting value. 6 5.1 Remote Control The infrared sensor is located on the top of the projector. The distance between the sensor and remote control should not exceed 10 meters for the remote control to function correctly. How to insert batterie...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории