Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Field adjustable for either right hand or left hand application. May be used as feed point. Finish: White (P), Black (MB) L905 T Connector To connect three track sections into a T configuration. Field adjustable for either right hand or left hand application. May be used as feed point. Finish: White (P), Black (MB) L906 X Connector To connect four track sections into a cross configuration. May be used as feed point. Finish: White (P), Black (MB) L907 Outlet Box for use with T-Bar ceiling L901, L903, L904, L905 or L906 connector also required. 4"x 4" x 1 1/8". Finish: White (P), Black (MB) L908 Mini Joiner A low profile connector to cleanly and crisply join two straight track sections end-to-end. (Note: The L908 is not a feed point). Finish: White (P), Black (MB) L909 Floating Canopy and Connector Track can be connected to existing outlet box located anywhere along the track. Comes with canopy cover, connector, dead-end and mounting hardware. 4 1/8" x 4 1/4" x 1 3/8". Finish: White (P), Black (MB) L950 Cord and Plug Connector 12' three-wire cord with grounded plug. Maximum capacity 10 AMP Finish: White (P), Black (MB) L951 Wire Way Cover for Pendant Assembly Kit For track to be wired through stem (order one for each feed point used). Shown with end feed and pendant stem kit-order separately Finish: White (P), Black (MB) L979 Conduit Continuation Kit Consisting of one left feed and one right feed. To continue a run around obstructions. Designed to accept 1/2" trade size conduit fitting (not included). Finish: White (P), Black (MB) L983 T-Bar Attachment Clip Allows track to be attached to inverted tee ceiling. Order as follows: 2 kits for 2' Trac; 2 kits for 4' Trac; 3 kits for 8' Trac and 4 kits for 12' Trac. L986 Mini-T Bar Clip For mounting Trac on suspended ceilings with mini-grid (9/16" wide) system. L994 45° Pendant Adapter For installing pendant mounted Power-Trac on sloped ceiling. For use with L992 and L993. Finish: White (P), Black (MB) L980 Live End Conduit Adapter Designed to accept standard 1/2" trade size conduit fitting (not supplied). Use when feeding to track through surface conduit system. Finish: White (P), Black (MB) L992 Pendant Kit Assembly Order 2 kits for 2' Trac; 2 kits for 4' Trac; 3 kits for 8' Trac; and 4 kits for 12' Trac. Includes one 18" threaded steel stem, canopy and mounting hardware. L48 48" Steel Stem For additional length with L992. Can be field cut. Finish: White (P), Black (MB) DE600 Dead End Replacement Dead Ends for Single Circuit Track (6 included) Finish: White (P), Black (MB) COOPER LIGHTING 311 TRACK LIGHTING Single Circuit...