Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC power cable from the socket when cleaning the TV. Otherwise, there is the risk of electric shock. 19) Do not dispose of the batteries in fire. • Do not short circuit, dismantle or overheat the batteries. There is the risk of explosion if the batteries are not replaced correctly. Replace only with the same or equivalent type batteries. 20) Disposing of the exhausted batteries: • Dispose of the exhausted batteries in accordance with the local laws and regulations in order to protect our environment. 21) Do not dispose of your TV with regular household waste. Observe local laws and regulations for disposal. 22) For stand fitting and removal please refer to loose leaf sheet inside TV carton. Note 1: This is a Class A product. During operation, the device can cause radio interference. In this case the user may have to remedy this. Please contact your specialist dealer. Note 2: Electromagnetic fields can cause temporary performance degradation. This can be distinguished as noise in the image. 6 7 Not 1: Your TV will switch to the STANDBY mode in five minutes if there is no broadcast signal from the aerial. Note 2: Your TV is equipped to operate with TV buttons in case your remote is broken or the batteries are exhausted. 3. To power on your television, press any numerical key or PR+ or PR- keys on the remote control. For this process, you can also use the buttons on your TV. The picture will appear on the screen after a short while. 4 Remove your television carefully from its box. You can keep the packaging of your television to use in future. Contents of the box Power cable Remote control 2 batteries Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device. 4.1-Aerial connection 4.2-Powering on your TV and the initial use 1. Insert the power cable into the power supply input located on the back panel of the LCD TV. 2. Insert the power cable plug supplied with the device into the mains socket. OR Start Note: If you are not going to use your television for a long time, unplug its power cable from the socket. Initial power on and performing settings To set up your television, read the sections on the TV controls and making the channel settings. 4.3-Batteries Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5 V batteries are suitable. Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose. Do not mix used batteries with new ones or different types of batteries together. The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV. 5 Your new television 5.1-TV Control Panel or or Volume Level Down/Up Program Down/Up button button or or or Stand by indicator Menu button / Source selection button Bright light: TV is in Stand-by or or Dimmed light: TV is On On-Off / Standby button No light: Power Cable is not connected. 5.2-Rear and Side External Connections 1-Component video input (Y) 2-Component audio input (L) 3-Component video input (Pb) 4-Component audio input (R) 5-SPDIF Digital audio output 6-Component video input (Pr)) 7-VGA (PC connection input)) 8-AV1 scart 9-AV2 scart) 10-Antenna input 11-PC audio input 12-Power input 13-Stereo Headphone socket 14-S-VHS input 15- Video input PHONO connector 16-Sound input PHONO connector (Left/L) 17-Sound input PHONO connector (Right/R) 18-CI slot input 19-HDMI 1 input 20-HDMI 2 input Please see Technical Specifications Table on page 31 for the available external connections on your television. • Please do not use the video PHONO and S-Video connection simultaneously, otherwise these two devices might influence the picture quality of one another. 8 5.3-Remote Control Note: In the analog mode when no menu is open on the screen, Up/Down movement buttons function as program forward/backward button and Left/Right movement buttons function as Volume up/down button. (D) : Digital Mode Only Stand-by mode On/Off button Temporary sound mute (Mute) button AV modes selection menu button Picture Format selection button PAT (Picture and Teletext) Mode ZOOM mode selection button Subtitle selection button (D) Not used on this model (D) Numeric buttons TV, Radio, Data, Favorite channel selection button (D) Page Stop button in Txt mode (Hold) EPG selection button (D) Question/Answer button in Txt mode (Reveal) Information button Index page button in Txt mode MENU button Exit menu button Return to previous menu button Up movement button (Menu) Next page selection button in Txt mode Down movement button (Menu) Previous page selection button in Txt mode Left movement bu...