Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Changing the COM port # Some programs require COM 1, 2, 3 or 4 and the USB cable is often installed as COM 5 or higher. To change the assigned COM port number, do the following: - Open Device Manager. - On the "Device Manager" dialog box, look "Ports (COM & LPT) " tree. - Click on the "Port Settings" tab. Click on the "Advanced" button. - On the bottom left side pull down the bar and select COM 1, 2, 3 or 4 (NOTE: Choose one that dos not say "in use" next to it). Click "OK". - Click "OK" again. Notice that the device will show up as being on the same COM port that it was before (i. e., COM5), but will show up on the new port if you close the Device Manager and open it again. - Close the Device Manager. Limited Warranty & Limitation of Liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke Authorized Service Center to obtain return authorization information, then send the defective product to that Service Center with a description of the problem. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Fluke Corporation Fluke Industrial B.V. P. O. Box 9090 P. O. Box 90 Everett WA 98206-9090 7600 AB Almelo USA. The Netherlands Service Centers To locate an authorized service center, visit us on the World Wide Web: fluke.com or call Fluke using any of the phone numbers listed below: + 1-888-993-5853 in USA and Canada + 31-40-2675-200 in Europe + 1-425-446-5500 from other countries ...
Эта инструкция также подходит к моделям:Телевизоры - OC4USB (137.69 kb)