Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
It can be used as a stand-alone unit or integrated into a mobile multimedia system. ABOUT THE MANUAL AND WARRANTY To start enjoying your new Clarion TVS5091, please read the instructions listed in this manual. Keep all instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. Also, save your original sales receipt as proof of purchase. TABLE OF CONTENTS Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 Package Contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 Button Locations • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 Car Stand Installation • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 RemoteControl Battery Installation • • • • • • • • • • • • • • • • • • • • • 6 Installation • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 TVOperation • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 Auxiliary Video Inputs Operation • • • • • • • • • • • • • • • • • • • • • • 7 Picture Adjustment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 Audio Adjustment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 FMTransmitter • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 Care and Maintenance • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 Product Specs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10 Notes • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10 PRECAUTIONS • This set is for use in DC 12V, negative ground vehicles. • Do not operate the set in ways other than described in this guide. Doing so may damage it and may void your warranty. • SAFETY FIRST! For rear seat use only. Do not install on dashboard or anywhere else that would permit monitor to be viewed by the driver. Monitor must not be located in the motor vehicle at any point forward of the back of the front seats. Monitor must never be used in any manner that will distract driver or interfere with driver’s safe operation of the motor vehicle. • Be careful not to run down the car battery while using the set with the car stopped. 2 • Do not disassemble or modify the set. Doing so may damage it and voids your warranty. •. Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry • Do not let lit cigarettes or other hot objects touch the set. Doing so may damage or deform the cabinet. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 30 – 113 degrees F.) • In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set will work normally once the temperature increases. • Small black and shiny dots inside the liquid crystal panel are normal for liquid crystal products. PACKAGE CONTENTS The Clarion TVS5091 comes with the following items: • IR Remote Control • Car Stand • A/V Input Cord • Power Cord • AC Power Adapter Available Options: • Additional A/V Input Cord for second A/V Input (AV100) • Additional Car Mount Antenna for optimum TV reception (ZCB003) 3 BUTTON LOCATIONS 1 Power ON/OFF Switch 2 DC Power Connector 3 Diversity Input (Future Use) 4 Internal Speaker 5 FM Transmit Switch 6 IR Remote Sensor 7 Stand-By Indicator 8 Rod Antenna 9 Power Button 0 Auto Program Button q Input Selection Button w Picture Selection Button e Volume Up/Down Buttons r Channel Up/Down Buttons t Optional Antenna Input Connector y AV1 Input Connector u AV2 Input Connector i Earphone Connector 1 Number Pad 2 Skip 3 Erase/Write 4 Volume Up 5 Volume Down 6 TV/Video 7 Power 8 Channel Up 9 Mute 0 Channel Down q Picture Select w Auto Memory e TV/CATV 4 CAR STAND INSTALLATION 1. Choose the proper place to install. Make sure the surface is dry and clean. • If mounting on a flat surface, use a screwdriver to remove the two screws on the bottom of the stand to take away the support bracket. • If mounting on an angled surface, bend the support bracket to fit the curve of the install surface. 2. Tear off the protective paper of the adhesive tape from the car stand and press the stand to the install surface. • For installations on an angled surface, two additional screws can be added at the end of the stand for added support. 3. Put the TV on the stand. • Insert the TV lockscrew on the stand into the hole on the bottom of the TV and tighten to secure the TV to the stand. 4. Use the pedestal lock-knob on the side of the stand to adjust the viewing angle of the TV. 5. To dismount TV from the stand, loosen the TV lockscrew and remove the TV. 1 TV pedestal 4 ...