Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. 3. SCART INPUT 4 SIGNAL MEMORY CALL .......... Use to select AUTO, USER 1 or USER 2. See page 18. HORIZ. POSITION ...... Use to adjust the horizontal position of the image. VERT. POSITION ........ Use to adjust the vertical position of the image. FINE SYNC. ......... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING .......... Use to avoid image noise such as wide stripes. COMPUTER INPUT ...... The unit adjusts itself automatically when connected to a DVD player with a component video output (Y, CB, CR). In the case the projector is connected to equipment that includes RGB output terminal, adjust to RGB mode. HOLD .................. Adjusts the image when flagging occurs near the top of the screen. R G BR G B A U MEMORY CALL SIGNAL AUTO HORIZ. POSITION 0 VERT. POSITION 0 TRACKING 0 COMPUTER INPUT RGB FINE SYNC. 0 HOLD AUTO USER MEMORIZE DELETE DEFAULT XGA60opt. 5 SIGNAL - USER (Normally, there is no need for adjustments.) CLAMP POSITION/ CLAMP WIDTH .......... If you use something similar, the brighter colors of the projected image may become blurred. In this case, adjust CLAMP POSITION or CLAMP WIDTH. HORIZ.PIXELS .... Use to adjust the width of the image. The image size grows wider as the number increases. (Adjust to the horizontal pixels of the input signal for normal setting.) VERT.LINES ....... Use to adjust the height of the image. The image size grows higher as the number increases. (Adjust to the vertical lines of the input signal for normal setting.) VERT.SYNC. ........ Use to adjust the image when its motion does not run smoothly. Select AUTO for normal setting. SHUTTER(U) ....... Use to adjust the image when the noise etc. appears on top part of image. SHUTTER(L) ....... Use to adjust the image when the noise etc. appears on bottom part of image. SHUTTER(LS) ..... Use to adjust the image when the noise etc. appears on left side of image. SHUTTER(RS) ..... Use to adjust the image when the noise etc. appears on right side of image. • When the setting of the SIGNAL-USER menu is changed, the image may not be displayed correctly. In this case, select DEFAULT in the SIGNAL menu, and press the ENTER button. CLAMP POSITION SIGNAL-USER 0 CLAMP WIDTH 0 HORIZ. PIXELS 0 SHUTTER(RS) 0 VERT. LINES 0 VERT. SYNC. AUTO SHUTTER(LS) 0 SHUTTER(L) 0 SHUTTER(U) 0 EN – 17 Picture adjustment User memory for signal setting This projector can memorize the maximum of 2 signal menu settings. Memorizing the setting 1. Select MEMORIZE in the SIGNAL menu, and press the ENTER button. 2. Press the $or % button to select the memory which you wish to record (USER 1 or USER 2). 3. Press the ENTER button. • Any buttons are ineffective about 3 seconds of recording setting. Wait for recording to have been completed before operating the buttons. Select the user setting Select MEMORY CALL in SIGNAL menu, and press the $ or % button to select the memory (USER 1 or USER 2). Reset the recorded setting 1. Select DELETE in the SIGNAL menu, and press the ENTER button. 2. Press the $or % button to select the memory which you wish to reset (USER 1 or USER 2). 3. Press the ENTER button. The recorded setting will be reset. • Any buttons are ineffective about 3 seconds of resetting the recorded setting. Wait for resetting to have been completed before operating the buttons. Adjusting the image You can adjust the picture by using the IMAGE menu. CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. To control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS in IMAGE menu. Press the % button to lighten the image and the $ button to darken the image. To determine the intensity of the color : Adjust COLOR in IMAGE menu. Press the % button to increase the amount of color in the image and the $ button to decrease it. To adjust the red-green color balance of the image : Adjust TINT in IMAGE menu. Press the % button to increase the amount of green in the image and the $ button to increase the amount of red in the image. To adjust the detail and clarity of the image : Adjust SHARPNESS in IMAGE menu. Press the % button to make the picture seem sharper and the $ button to make it softer. Color matrix This feature adjusts the color balance in each color of RGB (Red, Green, Blue), and their neutral colors (yellow, cyan, magenta) by using Color correction adjustment. Use Color correct adjustment when enphasizing a specific color, or when only a certain color balance is not correctly adjusted. 1. Select COLOR MATRIX in IMAGE menu. 2. Press the $ or % button to select USER . 3. Press the ENTER button. COLOR MATRIX RED 0 0 0 RGB-TINT 0 0 0 GREEN BLUE YELLOW CYAN MAGENTA 0 SATURATION 0 4. Press the { or } button to select the desired color. • If you wish to adjust the color inte...
Эта инструкция также подходит к моделям:Телевизоры - XL5950U (1.94 mb)