Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
External connection External connection Connecting an Antenna or Cable System to VCR and TV Antenna Choose your antenna hook-up style A, B or C and connect to “IN FROM ANT.” on the VCR. Connect cable from “OUT TO TV” on VCR directly to the 75 . input terminal on your TV. 75 TERMINAL BACK OF VCR STYLE A STYLE B STYLE C BACK TV PANEL IN OUT . Cable Service Connect cable directly to “IN FROM ANT” on VCR . (If using a cable box, connect cable to input on box. Connect cable from output on box to “IN FROM ANT” on VCR .) Connect cable from “OUT TO TV” on VCR directly to the 75. input terminal on your TV. NOTE: Tune your TV to match the output channel on the cable box and VCR (such as Channel 3 or 4). 75 TERMINAL BACK OF VCR CABLE BACK OF CABLE BOX BACK TV PANEL IN OUT IN OUT . Using the PICTURE menu Using the PICTURE menu CONTRAST Adjust left to decrease picture contrast. Adjust right to increase picture contrast. BRIGHT Adjust left to darken the picture. Adjust right to brighten the picture. COLOR Adjust left to decrease color intensity or saturation. Adjust right to increase color intensity or saturation. TINT Adjust left to decrease the red tone. Adjust right to increase the red tone. SHARPNESS Adjust left to soften the picture detail. Adjust right to sharpen the picture detail. Using the P.LOCK menu Using the P.LOCK menu Figure 1 Note: 1. When you enter P.LOCK submenu first time, red “NEW CODE” will display on the menu, input four-digit numbers as your password by pressing 0-9 buttons. After you input the numbers, blue “ENTER CODE” will display on the menu, input again the password you have set to enter P.LOCK submenu, the submenu will display as the following: Figure 2 2. If you have set your password, when you want to enter P.LOCK submenu, the menu will display blue “ENTER CODE” shown as figure 1, input your password to enter the submenu shown as figure 2. 3. If you need to modify your password, first enter the submenu shown as figure 1, then press CODE button on the remote control, the “OLD CODE” will display in red on the menu; Input your old password, then “NEW CODE” will display in red on the menu, input four-digit numbers as your new password. “ENTER CODE” will display in blue on the menu, input your new password to enter the submenu shown as figure 2. If you forget your password, input 4769 to enter the submenu and renew your password. CH LOCK Select this item to enter CH LOCK submenu (as shown). You can set to lock one channel in this submenu. LOCK ON: Turn on CH LOCK. OFF: Turn off CH LOCK. CH AIR: Select the channel you want to lock, you can use VOL button or number buttons to input channel number. Note: “CH CABLE ***” will be displayed under CABLE mode. CH LOCK ON: The selected channel in the CH LOCK menu cannot be viewed. OFF: LOCK is deactivated and any selected channel for CH LOCK, can be viewed. Using the P.LOCK menu Using the P.LOCK menu V-CHIP ON: Turn on V-CHIP function. OFF: Turn off V-CHIP function. MPAA RATING: Set MPAA rating. “BLOCK” prohibits watching the BLOCKchannels, VIEW permits watching all channels. If abhigh rating is set as “VIEW”, lower ratings will be set toVIEW mode. If a low rating is set to “BLOCK”, higherratings will be set to BLOCK mode. G: For all children. PG: Directed to old children. PG-13: General Audience. R: Parental Guidance suggested. NC-17: No one under 17 admitted. X: For Adults. TV RATING: Set MPAA rating. “BLOCK” prohibits watching theBLOCK channels, VIEW permits watching all channels. If a...
Эта инструкция также подходит к моделям:Телевизоры - TTM-2004 (187.53 kb)
Телевизоры - TTM-2004 (187.53 kb)
Телевизоры - TTM-2004 (187.53 kb)
Телевизоры - TTM-2004 (187.53 kb)