Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Connect the yellow video plug of the cable to the composite video output jack of the external device. Connect the white and red audio plugs to the audio output jacks of the external device. 2. With the other end of the cable, connect the yellow, red, and white plugs to the A/V Input jacks located on the front of the unit. Page Cable Connections Cable Connections Youcantransmitsignalsfromtheunit’sDTV,DVD, andAVmodesovertheAVOutputjacks. Turnoffalldevicesbeforemakingsystemconnections. Donotconnectthepoweruntilallconnectionshavebeenmade. Coaxial Digital Audio Output (DVD only) Use this connection in conjunction with the integrated DVD player in order to output digital audio to a home theater receiver. The home theater receiver must be equipped with a coaxial digital audio input jack. For your reference: When DVDs recorded in Dolby Digital or MPEG audio are played, Dolby Digital or MPEG audio bitstream is sent to the player’s digital audio output connector. When the player is connected to a Dolby Digital or MPEG audio decoder via one of these output sockets, you can enjoy theater-quality audio in your home. A digital audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used. Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. This techniques supports both 5.1-channel surround sound and stereo (2-channel) sound, and enables a large quantity of sound data to be recorded efficiently onto a disc. Page 0 Coby Electronics Corporation Page 31 Cable Connections 1 2 Coaxial Digital Audio Cable Rear Audio/Video Output Jacks Dolby Pro Logic Surround Receiver with Digital Coaxial Audio Input Using an optional coaxial digital audio cable: Connect one end of the cable to the Coaxial Digital Audio Out jack located on the rear of the unit. Connect the other end of the cable to the coaxial digital audio input jack of the receiver. 1. 2. Cable Connections Cable Connections ThereceiverMUSTcontainaDolbyDigitalorMPEGaudiodecoder. AttemptingtoplayDVDsthroughareceiverwithoutthecorrectDolbyDigitalorMPEGdecodermayproduceextremelevelsofnoise. Thiscoulddamagebothyourears& yourloudspeakers. TheSPDIFDigitaloptionshouldbesetto“RAW”or“PCM”whenusingthisconnection(refertothesection“ DVDMode>DVDSetup>Audio”fordetails). Turnoffalldevicesbeforemakingsystemconnections. Donotconnectthepoweruntilallconnectionshavebeenmade. Power Connection After all system connections have been made, connect the AC Power Cord to a AC 120V/60Hz wall outlet. Iftheplayerwillnotbeinuseforalongperiodoftime,turntheTVoff,unplugtheunit,andremovethebatteriesfromtheremotecontrol. Makeallsystemconnectionsbeforepluggingtheunitintoawalloutlet. Page Coby Electronics Corporation DTV Mode (Digital TV) DTV Mode (Digital TV) Set the unit to DTV mode to view digital ATSC TV broadcasts. Press to switch the unit to DTV mode. (You can also press to toggle quickly between DTV and TV modes.) Basic Operation 1. Ensure that all cable connections have been made properly and securely (refer to the section “Cable Connections” for details). 2. Press to turn the unit on or off. 3. Press until the screen displays “DTV” to enter DTV mode. 4. If this is the first time you are using the unit, use the DTV setup menu to auto-search for DTV channels within broadcast range (please see the section “DTV Setup” for details). 5. Press or to adjust the volume level. • Press to disable the sound completely. To restore the sound, press again. 6. Press or to scan through the available DTV channels. • Press to return to the previously selected channel. 7. To tune to a channel directly: • Input the channel number with the numeric keypad and then press to enter. Page DTV Mode (Digital TV) DTV Mode (Digital TV) 8. To tune to a channel with multicast broadcasting directly: • Input the channel number with the numeric keypad and then press . • Input the multicast number with the numeric keypad and then press to enter. For your reference: Digital TV technology allows broadcasters the ability to provide multiple, simultaneous programming over one channel. This is called “multicasting”. Many broadcasters are offering these additional multicast channels. For example, if channel 4 in your area is multicasting, you can tune into these multicast programming streams on channels 4-1, 4-2, and 4-3 in the digital band. DTV Functions DTV/TV Press to quickly switch between DTV and TV modes. Info Press to display program info for the current channel. • Press again to exit the program info display. Page Coby Electronics Corporation DTV Mode (Digital TV) DTV Mode (Digital TV) EPG (Electronic Program Guide) Press to display current and future program info for the current channel (if supported). While the EPG is displayed: • Press to go to the next page. • Press to return to the previous page. • Press to exit the EPG display. Fav/Prog (Favorite Channels) Press to switch quickly between five of your favor...
Эта инструкция также подходит к моделям:Телевизоры - TV-DVD1390 (2.15 mb)