Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
3. Do not use this remote control for other equipments at the same time. 7 8 Figure. Cable connections Antenna/Power Connection Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/111 CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna. 222 Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V AC wall outlet. Compoent Input1/2 (Y Cb/Pb Cr/Pr) The component port is capable of accepting high-definition signals from standard video sources. (e.g., cable/ satellite boxes, DVD players, VCRs, etc.) 111 Connect the Y/Pb/Pr port by the component cable to input the video signal. 222 Connect “R” "L" port by the supplied AV cable to input the audio signal. The red/white plug of the AV cable is for the audio conneciton and the yellow plug for the video connection. S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) 111 Connect the S-Video port by the S-Video cable to input the video signal. 222 Connect the AUDIO-L/R port by the supplied AV cable to input the audio signal. Cable Connections > > External AV Source Amplifier or Digital Decoder Set the unit into the relative input/output mode to enable the signal pass. NOTE: We supply one set of AV cable and one piece of power cord with this product. The white/red plug of the AV cable is for the audio connection and the yellow plug for the video connection. The white/red plug of the AV cable can also be used separately to input the audio signal in the S-video/Component connection. Cable Connections Cable Connections AV1/2 Input The CVBS port is capable of accepting signals from standard video sources(e.g., cable/satellite boxes, DVD players, VCRs, etc.) 1. ConnecttheVIDEOportwiththeyellowplugofthethesuppliedAVcable. 2. ConnecttheL/Rportwiththered&whiteplugofthesuppliedAVcabletoinputtheaudiosignal. VGA Input The VGA port of the TV is capable of accepting high-definition signals from computers with a VGA output jack. When used as a computer moniter, connect the VGAjack and the PCAudio In jack with a 15-Pin D-Sub cable and a 3.5mm stereo audio cable. HDMI1/2 Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable.AHDMI cable is required for the HDMI connection. These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive). Component Input COMPONENT 1 COMPONENT 2 AV Input S-Video Input AV1 Unit Side Panel AV2 NOTE: 1. Be sure to have all necessary connections properly done before connect the power supply. 2. WheninputtheAVsignal,refertothemanualoftheexternalsourcesaswell. 9 TV Function TV Function Preparations 1. Connect the cables.(Refer to the “Cable Connections” section for details). 2. Press the POWER button to turn on the player. 3. Press the MODE button to select the TV signal mode. 4. Press the CH+/-buttons to skip channels. Or you can press the number buttons to input channels directly. For the initial use, you need to scan channels under the Channel Menu. See the "Channel Menu" section for details. TV Setup Menu Various features can be preset through the TV setup menu, please read this section carefully. • Press LCD SETUP to display the setup menu, TV setup menu consists of PICTURE, AUDIO, TIME, SETUP, LOCK as well as CHANNEL. • Press the left/right direction button to select the desired submenu, press OK to enter. While working with the menu, 1. Press the up/down direction button to select the option. 2. Press the left/right direction button to adjust. 3. Press LCD SETUP to exit/back up menu. Warm Picture Menu ITEM DESCRIPTION Picture Mode Setup the picture mode (Personal, Standard, Dynamic, Soft). Contrast Adjust the display contrast Brightness Adjust the display brightness Color Adjust the display color Tint Adjust the display tint Sharpness Adjust the image sharpness Color Temp Set the color mode (Normal, Warm, Cool). 10 TV Function TV Function Audio Menu ITEM DESCRIPTION Sound Mode Set the sound mode. (Standard, Music, Movie, Sport, Personal). Bass Adjust the bass. Treble Adjust the treble. Balance Adjust the sound balance. Surround Set the audio surround effect on/off. AVC SetAVC on/off. Audio Language Set the DTV audio language. Time Menu ITEM DESCRIPTION Sleep Timer The unit will shut down automatically on the Sleep Time. The available option is 5/10/15/30/45/60/90/120/180/240 min, and Off. The count down would start immediately after setting. You can access this function by repeatedly pressing the SLEEP button on the remote also. To check the timer left, press the SLEEP button on the remote once. To cancel the sleep timer, set the timer to Off. Time Zone Set the DTV time zone. (Pacific,Alaska, Hawaii, Eastern, Central, Mountain) Daylight Saving Time Set the DTV daylight saving function on/off. Clock Display the DTV clock info...
Эта инструкция также подходит к моделям:Телевизоры - TFDVD2697 (1.56 mb)