Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys. ¦Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys. 17 ENGLISH 18 Chapter 2 Installing the LCD TV .. Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal. .. Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. VHF/UHF IN HDTV/TV Air/Cable VHF/UHF IN HDTV/TV Air/Cable BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE. This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse. 4A 250V 5x20mm Back of TV Fuse Firm Plastic Prying Tool (Using a metal tool may cause shock) .. Press the button on the remote to turn on the LCD TV. Always disconnect the LCD TV from the main power source when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into the standby mode, it does not disconnect the device from the main power source. To completely disconnect the main power source, please remove the power cord’s plug from the socket. Chapter 2 Installing the LCD TV Press the button on the remote to turn on the LCD TV. ENGLISH Main .. TV(CABLE/AIR) Press the INPUT button on the remote to display the Input List. Use the ^Ў buttons to select TV and press the OK button. TV Select Exit Channel Scan Tuner Mode Cable Channel Skip Time Zone Eastern Time .. Press the MENU button on the remote control to display the Main menu, and use the <> buttons to select the TV. Status: Scanning..... Cable Analog Channels: 25 Digital Channels: 0 47% The Channel Scanning will create a list of receivable channels for the current input (antenna or cable). You will be required to run Channel Scanning for each RF input to create a list of available channels from both inputs. .. Press the OK button to display the received channel list, then press ^Ў to select a channel. Or, use the . (Input button) with 0-9 buttons to select digital channel( for example 9.1) Channel List • 9-1 KQED-HD The digital main channel might include many subchannels (for example 9-1, 9- 2..) that are showing program at the same time. 19 Chapter 2 Installing the LCD TV Connecting a VCR Rear of TV A B I I I l AUDIO Cable S-VIDEO Cable AV Cable • METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks. METHOD B: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s S-VIDEO IN input jack. • Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. • Press the button on the remote to turn on the LCD TV. • To watch a videotape, press the SOURCE button on the remote to select VIDEO2( METHOD A), or VIDEO3 (METHOD B). 20 Chapter 2 Installing the LCD TV Connecting a Video Camera or Game console Rear of TV L R VIDEO1 IN VIDEO Right Side ENGLISH A B I I I l or AUDIO Cable S-VIDEO Cable AV Cable GAMECONSOLE • METHOD A: Use a composite cable to connect the video camera’s or game console’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks. METHOD B: Use an audio cable to connect the video camera’s or game console’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the video camera’s or game console’s s-video output jack to the LCD TV’s S-VIDEO IN input jack. • Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. • Press the button on the remote to turn on the LCD TV. • To watch a video vis camera or game console, press the Input button on the remote to select VIDEO2/VIDEO1( METHOD A), or VIDEO3 (METHOD B). Not all cameras have the ability to connect to a TV. Please check your video camera user guide for compatibility. 21 Chapter 2 Installing the LCD TV Connecting a DVD Player C Rear of TV A B I I l or PrPb PrPb AUDIO Cable S-VIDEO Cable AV Cable COMPONENT/AUDIO Cable DVD PLAYER • METHOD A: Use a composite cable to connect the DVD player’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks. METHOD B: Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the DVD player’s s-video output jack to the LCD TV’s S-VIDEO IN input jack. METHOD C: Use a component cable to connect the DVD player’s component output jacks to the LCD TV’s YPbPr1 IN or YPbPr2 IN input jacks. Use an audio cable to connect the DVD player’s component audio jac...