Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts. 41 5G60701A E P39-47 41 6/11/03, 6:08 PM Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an Audio Amplifier To Audio (L) Input To Audio (R) Input Amplifier Rear of TV/DVD Audio (R) Output Audio (L) Output AUDIO cord (not supplied) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as shown below. Coaxial digital cable (not supplied) AV Amplifier with built-in digital surround Center Speaker Front Speaker (Left) Front Speaker (Right)Subwoofer Surround Speaker (Left) Surround Speaker (Right) Coaxial Digital Audio Output To Coaxial Digital Audio Input Rear of TV/DVD TV/DVD decoder as listed above * Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. * “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. NOTES: • When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. • Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit. 42 5G60701A E P39-47 42 6/11/03, 6:08 PM Connections to other equipment Using the audio/video inputs If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT. Press INPUT SELECT repeatedly to select the desired mode. NOTE: “LINE” or TV channel will display on the screen. In the DVD mode this key will not operate. 1. To connect the TV/DVD to a VCR Press the INPUT SELECT to select the desired mode to use the TV as a monitor. Operate your VCR as usual. VCR Front of TV/DVD LINE To Audio/Video OUT VIDEO IN AUDIO IN (L) AUDIO IN (R) PHONES VIDEO IN L – AUDIO IN – R (MONO) Audio/Video cord (not supplied) 2. To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the TV/DVD as shown. Camcorder Front of TV/DVD To Audio/Video OUT Audio/Video cord (not supplied) VIDEO IN PHONES VIDEO IN L – AUDIO IN – R (MONO) AUDIO IN (R) AUDIO IN (L) 3. To connect the TV to a TV Game The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information. Front of TV/DVD Audio/Video cord (not supplied) To Audio/Video OUT VIDEO IN AUDIO IN (L) AUDIO IN (R) PHONES VIDEO IN L – AUDIO IN – R (MONO) 43 ENGLISH 5G60701A E P39-47 43 6/11/03, 6:08 PM Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. • Connect the DC car cord to the cigarette lighter socket. • The DC car cord fuse is drown, replace fuse. Poor reception on some channels Horizontal or diagonal bars on screen Poor sound or No sound TV/DVD does not operate. • Check antenna connections, reorient antenna. • Check for sources of possible interference. • Station or CATV experiencing problems, tune to another station. • Station signal is weak, reorient antenna to receive weaker station. • Check for sources of possible interference. Poor picture or No picture • Station or CATV experiencing problems, tune to another station. • Check antenna or CATV connections, reorient antenna. • Check for sources of possible interference. • Check picture control adjustments. • Station or CATV experiencing problems, tune to another station. • Check Volume adjustments. • Check for sources of possible interference. Poor color or no color • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or CATV connections, reorient antenna. • Check for sources of possible interf...
Эта инструкция также подходит к моделям:Телевизоры - MVD2009CB (1.18 mb)