Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
VHF / UHF antenna cable TV company or rear of this unit e.g.) ANT. IN RF coaxial cable * Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “Initial Setup” on page 10.) Note: • For your safety and to avoid damage to device, please unplug the RF coaxial cable from the antenna input jack before moving the unit. • If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions. • To easily switch your reception source between antenna and cable, install an antenna selector. • If you connect to the cable system directly, contact the CATV installer. [Connection to Cable Box or Satellite Box] Connect the RF coaxial cable on your home outlet to the input jack of the cable/satellite box. Use another RF coaxial cable to connect the antenna input jack of the unit to the output jack of the cable/satellite box. rear of this unit ANT. IN cable/satellite box satellite dish e.g.) cable TV company or ANT. IN RF OUT RF coaxial cable RF coaxial cable * Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider. .. Cables not included. Please purchase the necessary cables at your local store. 9 EN INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION External Device Connection [S-video or Video Cable Connection (Rear)] S-video connection offers good picture quality for video devices connected to the unit. Video connection offers standard picture quality for video devices connected to the unit. Make the connection as illustrated below. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. DVD player with the S-video output jack e.g.) VCR e.g.) AUDIO OUT L R VIDEO OUT S-VIDEO OUT AUDIO OUT L R VIDEO OUT S-VIDEO COAXIAL ANT. IN VIDEO L R S-VIDEO COAXIAL ANT. IN VIDEO L R RCA audio cable S-video cable RCA audio cable RCA video cable or rear of this unit rear of this unit • To use the S-video or video input jack on the rear of this unit, press [INPUT SELECT] to select “VIDEO1”. [Video Cable Connection (Front)] Video connection offers standard picture quality for video devices connected to the unit. Make the connection as illustrated below. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. e.g.) camcorder video game AUDIO OUT L R VIDEO OUT front of this unit VIDEO HEADPHONE MENU VOLUME L AUDIO R RCA audio cable RCA video cable • To use the video input jack on the front of this unit, press [INPUT SELECT] to select “VIDEO2”. Note: • If you connect to the S-video jack and the video jack at the same time, the S-video connection will have priority. [Digital Audio Output Connection (for digital broadcasting only)] If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Dolby Digital decoder e.g.) S-VIDEO COAXIAL ANT. IN VIDEO L R rear of this unit DIGITAL AUDIO COAXIAL IN digital audio coaxial cable .. Cables not included. Please purchase the necessary cables at your local store. INITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. ..Initial Setup This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and “AUTO PRESET CH”, which automatically scans and memorizes viewable channels. Before you begin: Make sure if the unit is connected to antenna or cable. 1 After making all the necessary connections, press [POWER] to turn on the unit. POWER • This operation may take a few moments. 2 Use [CH K / L] or [VOL X] to select the on-screen language from the choices on the left side of the TV screen. (ENGLISH / ESPANOL / FRANCAIS) CH CH SELECT LANGUAGE ENGLISH or NEXT:PRESS CHK ESPANOL DESPUES:PRESIONE CHL or VOL FRANCAIS APRES:PRESSEZ VOLX • Press [CH K] for English. • Press [CH L] for Spanish. • Press [VOL X] for French. 3 Use [CH K / L] to select “AUTO PRESET CH(TV/DTV)” for TV channels or “AUTO PRESET CH(CATV)“ for CATV channels, then press [VOL X]. orCH CH VOL - INITIAL SETUP 1. PLEASE CONNECT ANTENNA OR CABLE OR SATELLITE TO THIS UNIT. 2. SET UP THE ITEMS WITH , AND BUTTONS. AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV) • Scanning and memorizing the channels automatically start. CH 25 AUTO PRESET CH(TV/DTV) • When the scanning and memorizing are completed, the lowest memorized channel in the broadcasting will be displayed. EN Note: • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [MENU] during “AUTO PRESET CH”, this setting will be canceled. • The initial auto channel scan function can be executed for either TV/DTV or CATV only ...