Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
(Example: "2:50" stands for 2 hours 50 minutes) If you wish to cancel the Time Search at this point, press the MENU button. 4 Begin Time Search By pressing the REW/-^ or F.FWD/^ button, the TV/VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time. -MENU- TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] CAPTION [OFF] -----ETUr*' -21 - EN 8H30 RECORDING Make sure... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING You can ONLY watch the same TV program that is being recorded. ^ Select the channel to be recorded Press the number buttons on the remote control or the CHANNEL ▼ or ▲ button. Remember: If the TV/VCR is con or satellite box, the TV/VCR must then the channel to be recorded mu cable box or satellite box. ... . CH10 I J nected to a cable b be on CH3 or Cist be selected on t ga.3 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). f \ SP V J 3 Begin recording Press the RECORD button. J 4 Stop recording Press the STOP button when recording is completed. SKIPPING UNWANTED SCENES DURING RECORDING Press the PAUSE/STILL button f PAUSE 'j to temporarily stop recording. Press the PAUSE/STTLL or RECORD button to resume recording. L!!_ NOTES: • After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage. • If "CLOSED CAPTION (ON)" is selected, the On-Screen Display will appear for 5 seconds, then disappear. -22- EN 8H30 OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This function CANNOT be done from the remote control. • Recording starts immediately when the REC/OTR button is pressed. • When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. • To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. • To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear.) • Recording stops when 0:00 is reached. • Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). • If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off. 1 Select the channel to be recorded Press the number buttons on the remote control or the CHANNEL ▼ or A button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/SLP). 3 Begin OTR Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be determined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. Push(es) Display Recording length 1 push (normal recording) 2 pushes 0:30 30 minutes 3 pushes 1:00 60 minutes 4 4 17 pushes 8:00 480 minutes COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) You can make copies of video tapes made by friends or relatives for your enjoyment. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws._ Connect your TV/VCR and a Source (Playing) VCR using the following diagram. (Playing) VCR or camcorder. 2) Insert a blank video cassette, or one you want to record over, into the TV/VCR’s cassette compartment. 3) Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP). 4) Press the CHANNEL A or Y button on the TV/V CR until "AUX" appears on the screen. 5) Press the RECORD button on the TV/VCR. 6) Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation. -23- EN 8H30 TIMER AUTOMATIC TIMER RECORDING You may set the TV/VCR to start and end a ...