Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
NOTE: • If you press the POWER button while tape is rewinding, the Auto Return will stop. 4 Watch the recorded program Press the PLAY button. TO CANCEL THE AUTO RETURN MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. If there is a power failure of any kind, the unit will retain its memory for this feature. WAKE UP TIMER The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time. NOTES: • Use the remote control for this procedure. • Clock must be set to the correct time before setting the timer. • If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time. 1 Select “WAKE UP TIMER” Press the WAKE UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. Press the F.FWD/B or REW/s button until [ON] appears. 2 Select “TV” or “TAPE” Press the PLAY/K or STOP/L but ton until to point to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. WAKE UP B ON/OFF TIMER TV/TAPE TIME [12:00AM] WAKE UP ON/OFF TIMER B TV/TAPE [TV] [12:00AM] TIME - 23-EN 9I03 3 Set wake up time Set wake up time Press the PLAY/K or STOP/L but ton until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up [TV] WAKE UP ON/OFF [ON] TIMER TV/TAPEtime appears. B TIME [12:00AM] Each additional push will increase (or decrease) the time by 10 minutes. 4 Exit the Wake Up Timer setting Press the MENU button on the remote control to return to TV mode. TO CANCEL THE WAKE UP TIMER Repeat step [1] but select [OFF]. SLEEP TIMER The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode. 1 Select “SLEEP TIMER” Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears. 2 Set sleep time Press the PLAY/K, STOP/L, F.FWD/B or REW/s button until your desired sleep time appears. SLEEP TIMER [2:00] Each additional push will increase the time by 30 minutes up to 120 minutes. Press the MENU button on the remote control to exit the Sleep Timer setting. TO CANCEL THE SLEEP TIMER Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears. To view the time left for sleep timer press the WAKE UP/SLEEP button twice, then press the MENU button on the remote control to exit the sleep timer setting. COPYING A VIDEO TAPE You can make copies of video tapes made by friends or relatives for your enjoyment. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect your TV/VCR and a Source (Playing) VCR using the following diagram. [Fig.8] [The TV/VCR] [Ex: Source (playing) VCR or camcorder] Audio/Video AUDIO adapter cable (not supplied) INOUT VIDEO 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the TV/VCR’s cassette compartment. 3)Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP). 4)Press the CHANNEL K or L button on the TV/VCR until “AUX” appears on the screen. NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2) 5)Press the RECORD button on the TV/VCR. 6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation. - 24-EN 9I03 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF:
Телевизоры - F319CC (387.75 kb)