Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
(Rewind Search) s button– • Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP) 8 PLAY button– Press to begin playback. K button– • Press to select setting modes from the on screen menu. • Press to enter digits when setting program. (for example: setting clock or timer program) 9 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button– • When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. • Press to determine setting modes from on screen menu. Lights up in the Stand-by mode for Timer • Press to select a mode from a particular menu. Recording. (for example: LANGUAGE or USER’S SET UP) 4 Remote Sensor Window– Receives the infrared signals from the remote control. - 7-EN 9J27 - REAR VIEW - ANT DC 13.2V AC 120V 26 10 REC button– Press for manual recording. OTR button– Activates One Touch Recording. (only on the TV/VCR) 11 VOLUME X XX / Y YY buttons– Adjust the volume level. 12 CHANNEL K / L buttons– Press to select the desired channels for viewing or recording. You may display the main menu on the TV screen by pressing repeatedly this button on the TV/VCR. TRACKING function– Press to minimize video ‘noise’ (lines or dots on screen) during playback mode. (See page 18.) 13 EARPHONE jack– Connects to earphones (not supplied) for personal listening. The size of jack is 1/8” monaural (3.5mm). 14 Cassette compartment 15 Number buttons– Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press the 0 button and then 1 to 9. +100 button– When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press the “+100” button then press “2” and “5”.) 16 MENU button– Press to display the main menu on the TV screen. 17 DISPLAY button– Display the counter or the current channel number and current time on the TV screen. (See page 24.) 27 28 18 SPEED button– Press to choose the desired recording speed:SP/SLP. 19 T-PROG. CLEAR button– Press to cancel a setting of timer program. (See page 22.) COUNTER RESET button– Press to reset counter to 0:00:00. 20 GAME button– Sets the game mode and external input mode at the same time. (See page 15.) 21 TIME SEARCH button– Press to activate Time Search mode. 22 PAUSE/STILL button– Press to temporarily stop the tape during the recording or to view a still picture during playback. 23 MUTE button– Mutes the sound. Press it again to resume sound. 24 CHANNEL RETURN button– Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3. 25 WAKE-UP/SLEEP button– Sets the Wake up or Sleep Timer. (See page 22 and 23.) 26 ANT. terminal– Connect to an antenna or cable system. 27 DC 13.2V jack– Connect to the Car Battery Cord. 28 AC 120V jack– Connect to the AC cord. -8-EN 9J27 PREPARATION FOR USE ANT. INOUT ANT DC 13.2V AC 120V Dipole Antenna (Supplied) VHF/UHF Antenna (Not supplied) VHF/UHF Combiner (Not supplied) Flat twin-lead cable UHF Antenna (Not supplied) VHF Antenna (Not supplied) From Cable System 75-ohm Coaxial Cable (Not supplied) Satellite Box or Cable Box (Not supplied) From Cable System or Satellite Dish or or or or Flat twin-lead cable ANTENNA/CABLE CONNECTIONS DIPOLE ANTENNA HOOK UP 1. Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR. 2. Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter (accessory.) 3. Plug the Matching Adapter to ANT terminal of TV/VCR as shown in drawing. For the best reception, extend the Dipole Antenna and adjust its length and position. (Avoid handling the top section when making adjustments). NOTE: If it is difficult to get good reception with the indoor antenna, the use of an outdoor antenna is recommended. Before an outdoor antenna is connected to the set, the indoor antenna should be disconnected. VHF/UHF COMBINED ANTENNA A VHF UHF 75 ohm combination antenna can be connected to ANT terminal. VHF/UHF SEPARATE ANTENNAS In some areas it will be necessary to use an outdoor antenna. CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can: 1) Use the TV/VCR remote to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This unit will ONLY record and view the same channel. Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to...