Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
TIME SEARCH INDEX SEARCH – USER’S SET UP – 2 Select “TV AUDIO” Press the Arrow button K or L to RENTAL [OFF] VCR AUDIO [HIFI] REPEAT PLAY [OFF]point to“TV AUDIO”. AUTO RETURN [OFF] B TV AUDIO [STEREO] 3 Select [STEREO], [SAP], or [MONO] Press the ENTER button until [STEREO], [SAP], or [MONO] appears. 4 To return to TV mode Press the SETUP button on the remote control to return to TV mode. NOTES: • You must select the recording mode,either TV AUDIO [STEREO] or [SAP] when you record a broadcast. Refer to “MTS RECORDING/MONITOR MODE”. • If you select second audio when second audio is not available, the TV/DVD/VCR will record normal audio. • The TV/DVD/VCR records automatically MTS broadcasts in HIFI stereo sound unless you select SAP mode recording before you begin recording. - 24-EN 1C29 VIDEO CASSETTE This TV/DVD/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/DVD/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. TWO DIFFERENT TAPE SPEEDS Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play). The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/DVD/VCR. The TV/DVD/VCR will automatically turn on. Window CORRECT WRONG REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VCR. The cassette will eject. 2)Pull the cassette out of the cassette compartment. 3)Store the cassette in its case as shown. Tape Speed Recording/Playback Time Type of tape T60 T120 T160 SP mode 1 hour 2 hours 2-2/3 hours SLP mode 3 hours 6 hours 8 hours Note: You can play back a tape recorded in LP mode (Long Play). ERASE PREVENTION You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette. Tab Transparent Tape If you decide to record on the tape again, cover the hole with plastic tape. NOTE: • In DVD mode, Whether the cassette is with tab or without tab you insert, it doesn’t start playing until you press the PLAY button. In TV/VCR mode, if th cassette without tab is inserted, playback will automatically start. - 25-EN 1C29 PLAYBACK NORMAL PLAYBACK TV/VCR SLOW MOTION TV/VCR Make sure ... • TV/DVD/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VCR will start playback automatically. PLAY B 2 To begin playback Press the PLAY button. 3 To stop playback STOP Press the STOP button when playback is completed. NOTES: • If you press the PLAY button (of the TV/VCR side) in the DVD mode, you can start the VCR playback. • If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or the OPEN/CLOSE button. TRACKING ADJUSTMENT TV/VCR • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL button K or L until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. • You can reduce the noise lines by pressing the CHANNEL button K or L in slow mode, too. Tracking adjustment in Slow mode will not be set automatically. During pause, press the FWD button to reduce the playback speed. The TV/DVD/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VCR will automatically go into the Stop mode. PICTURE SEARCH TV/VCR This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes) NOTE: •If you press the F.FWD or REW button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP / EJECT button once to stop it, twice to eject it. 2)Press it again and the TV/DVD/VCR will now search in super high...
Эта инструкция также подходит к моделям:Телевизоры - EWC27T3, EWC19T3 (749.17 kb)