Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as shown below. ROD ANTENNAAND ADAPTOR ARE NOT SUPPLIED. OUTDOOR ANTENNA CONNECTIONS OUT DOOR VHF/UHF ANTENNA CONNECTION(ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. If using cable or Satellite, see page 8. Combination VHF/UHF Antenna(Single 75 ohm cable Or 300 ohm twin-lead wire) Connect the 75 Ohm cable form combination VHF/UHF antenna to the antenna jack. OR If your combination antenna has a 300 ohm twin-lead wire, use a 300-75 ohm matching transformer (NOT SUPPLIED) Combination VHF/UHF Antenna(separate VHF and UHF 300 ohm twin-leads) Combiner UHF 300 Ohm VHF 300 Ohm VHF/UHF 75 Ohm Combiner UHF 300 Ohm VHF75Ohm Connect the UHF twin-lead wire to a combiner (NOT SUPPLIED). Connect the VHF twin-lead to a 300-75 ohm matching transformer (NOT SUPPLIED). Attach thetransformertothe combiner. Attach the combiner to the antenna jack. 10 Separate VHF/UHF Antennas Connect the 75 ohm cable from the VHF Connect antenna and the UHF antenna twin-lead wire to a combiner(NOT SUPPLIED). Attach the combiner to the antenna jack. NOTE: If your VHF antenna has a twin-lead wire use a 300-75 ohm matching transformer, then Connect the transformer to the combiner. VCR CONNECTIONS Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED). INCOMING CATV CABLE From VCR OUT jack VCR 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the rear of the TV. 3. Press the AV IN button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a tape. Follow the instructions below to connect a VCR to your television using Audio/Video cables (CABLES NOT INCLUDED). INCOMING CATV CABLE VCR AUDIO Cord VIDEO Cord From VCR OUT jacks To TV IN jacks 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2. Connect the audio cable from the VCR's Audio OUT jack to the TV's Audio IN jack. Connect the video cable from the VCR's Video OUT jack to the TV's Video IN jack. 3. Press the AV IN button until AV appears on the TV screen and press PLAY on the VCR to watch a tape. NOTE: Above are basic connection instructions; for detailed connection instructions for external units, refer to the external unit's owner's manual. 11 1 2 2 SETTING THE TV MENUS (CONTINUED) TURN ON THE TV SETTING THE TV MENU 1 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 FUNCTION Select Adjust Col. Sys NTSC Language English C.Caption Off Parental Ctrl Off CLOCK Select Adjust Clock - - / - - On time - - / - - Off time - - / - - Attention - - / - - Preset - - / - - Channel - - PRESET Channel 01 Add / Delete Add Reception CATV Auto Search Fine AFC On Select Adjust 1. Press the POWER button 1 to turn your TV On or Standby. 2. You can press the MENU buttons on the remote control or the MENU button on the TV set to adjust the , , or according to the menu shown on the screen. PICTURE PRESET CLOCK FUNCTION 2 2 12 * Noted: MENU exit on the TV screen is PICTURE, PRESET, CLOCK, FUNCTION picture. SETTING THE TV MENUS (CONTINUED) SETTING THE PICTURE MENU SETTING THE PICTURE SETTINGS 1 2 1. Press the Channel Up or Channel Down 2 button to select , , , , or the item. Settings Brightness Contrast Color Sharpness Tint SETTING THE BRIGHTNESS 2. Press the MENU button to enter and return Picture setting. 1. Press the Volume Up or Volume Down button to cyclically select , , , or . Standard Nature Mild Vivid Custom 1 2 3 3 1 2 3 1. Press the Volume Up or Volume Down button to adjust the setting .(0-100) 2. Press the MENU button to enter and return Picture setting. 13 2 1 3 2 1 1 2 3 3 2 1 1 2 3 3 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 SETTING THE TV MENUS (CONTINUED) SETTING THE CONTRAST SETTING THE COLOR SETTING THE SHARPNESS 5 6 1. Press the Volume Up or Volume Down button to adjust the setting. (0-100) 2. Press the MENU button to enter and return Picture setting.) 1 2 3 4 1 2 3 1. Press the Volume Up or Volume Down button to adjust the setting. (0-100) 2. Press the MENU button to enter and return Picture setting. 1 2 3 1. Press the Volume Up or Volume Down button to adjust the setting. (0-100) 2. Press the MENU button to enter and return Picture setting. 14 3 2 1 1 2 3 3 2 1 1 2 3 3 2 1 1 2 3 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 PICTURE Select Adjust Settings Standard Brightness 50 Contrast 65 Color 50 Sharpness 50 Tint 00 PICTURE Select Adjust Settings Sta...