Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
• The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiv- ing conditions. [ADD/DELETE FUNCTION] 1)Press the MENU button so that the menu display appears on the TV screen. 2)Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button. 3)Press the Arrow K or L button to point to "ADD/DELETE". Then press the Arrow B button. 4)Use the Arrow K or L button to select the channel you wish to put into memory or to erase from memory. NOTE: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" func- tion while this display appears on the screen. • Press the Arrow B or s button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. • Press the Arrow B or s button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5)Press the MENU button to exit the menu. PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [OFF] ADD/DELETE AUTO MEMO ADD/DELETE AUTO MEMO PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [OFF] Getting started 1 Connect the power cord to a standard AC outlet. NOTE: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2 Press the POWER button to turn on the TV/DVD. 3 Press the SELECT button on the remote control until channel number or "TV" appears on the screen. Then press the TV button. TV SECTION PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [OFF] - 15-EN 1B17 OPERATIONS WATCHING A TV PROGRAM CLOSED CAPTION Select the desired channel with the CH(annel) K or L button. Adjust the volume to the desired listening level using the VOL(ume) K or L button. 3 Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".) Note: Suppose that the TV/DVD is shut off or in any other mode than TV. Press the CHANNEL K or L button on the TV/DVD, and the TV/DVD will be in the TV mode to watch television. SELECTING THE SLEEP TIMER The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period. 1 Press the SLEEP button on the remote control. 2 You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.) SLEEP 10 To cancel the sleep timer: Press the SLEEP button repeatedly until "SLEEP 0" is displayed. NOTES: • When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost. • When the TV mode is changed to the DVD mode, the sleep time will be lost. This TV can receive C1 and C2 of Caption and Text. CAPTION MODE 1)Characters can be displayed on the TV screen when the received broadcast signal contains the Caption Signals. 2)Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, it is displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines) NOTE: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will not be displayed. TEXT MODE 1)Displays the text on the screen by scrolling (max. 7 lines) 2)If the received broadcast signal does not contain the caption or text signal, no change will occur. NOTES: 1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text. 2)Captions and texts may not match the TV voice exactly. 3)Interference may cause the closed caption system not to function properly. 4)The caption or text characters will not be displayed while the menu display or function’s display is shown. 5)If you see this screen!! If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF]. - 16-EN 1B17 CLOSED CAPTION SELECTION You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. Press the MENU button so that the menu display appears on the TV screen. Press the Arrow K or L button to point to "CAPTION". 3 Press the Arrow B or s button to select the mode you wish. 4 When done, press the MENU button to exit the menu. : Press the Arrow B or s button. PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [OFF] PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [ C1] PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION [ C2] PICTURE CHANNEL SET LANGUAGE [ENGLISH] ESPANOL FRANCAIS V-CHIP SET UP CAPTION ...